GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Calculating And Reporting TB Laboratory Turnaround Times

Turnaround time (TAT) is one of the clearest ways for a tuberculosis laboratory to show whether its testing pathway is reliable, timely and responsive to clinical need. A useful figure tells staff how long a specimen takes to move through reception, testing, verification and reporting—not simply how long an instrument runs.

For Australian laboratories, the calculation must reflect real operating conditions. A specimen collected in central Sydney may reach the laboratory the same day, while one sent from a remote Northern Territory or Western Australian community may depend on scheduled flights, road transport, weekends and public holidays. A consistent method helps staff distinguish laboratory performance from transport or clinical delays.

Build A Shared Turnaround Definition

Before collecting data, agree on the start and end points. For a culture result, the clock might begin when the laboratory receives and logs the specimen, then finish when the authorised result is released to the requesting clinician or public health service. If the purpose is to assess the complete pathway, use specimen collection or dispatch as the starting point, but report this separately from the laboratory processing interval.

Different TB tests require different definitions. A molecular test may have a short analytical time, whereas liquid culture can require weeks of incubation and identification. Susceptibility testing, referral testing and repeat testing may add further stages. A report should therefore state whether it measures time to preliminary result, final culture result, identification, drug susceptibility result or complete case report.

Write the definition into the quality management system and include the time zone, business-hour rules and treatment of weekends. Australian services often operate with weekday courier runs, reduced staffing on public holidays and separate after-hours arrangements. The GLI Quality Tool provides a practical framework for documenting responsibilities, processes and quality indicators across the laboratory.

Capture Reliable Time Stamps

A dependable TAT calculation needs a small set of consistently recorded timestamps. At minimum, capture collection time, dispatch time, laboratory receipt, accessioning, test start, result availability, technical review and final report release. The laboratory information system should use synchronised clocks and a standard date-and-time format.

Staff should define what happens when a timestamp is missing or clearly incorrect. Do not silently replace an absent time with an estimate. Mark the record as incomplete, investigate the cause and report the proportion of excluded records. This prevents a high-performing statistic from being created by removing inconvenient cases.

Use a specimen identifier that links the initial sample, repeat tests, referrals and amended reports. Record specimen type, test requested, priority, referral location and whether the sample was rejected or recollected. A sputum specimen arriving from a regional Queensland clinic may have a different transport profile from one collected inside a Melbourne hospital, so location and pathway are important variables.

Privacy also matters. Australian laboratories should limit reports to information needed for quality monitoring and follow the Privacy Act 1988, relevant state or territory health-record requirements and local governance procedures. Use coded datasets for routine analysis and restrict access to authorised staff.

Calculate Measures That Explain Performance

The basic elapsed TAT is calculated as:

TAT = report release date and time − defined start date and time

Calculate each specimen separately before summarising the group. The median is usually more informative than the mean because one very delayed culture or courier failure can distort the average. Add the 25th and 75th percentiles, the minimum and maximum, and the percentage meeting the agreed target.

Business-hour TAT can be useful when staff work to service-level targets, but it must be calculated with an approved calendar. Elapsed time may be appropriate for urgent molecular testing or critical result notification. Never mix calendar-hour and working-hour results in the same trend line.

Stratify results by test method, specimen type, urgency, collection site, referral pathway and month. A single overall figure may hide a delay affecting rural specimens or a backlog in susceptibility testing. Report the denominator as well: “92% within target” has little meaning without stating whether the calculation used 50, 500 or 5,000 completed records.

Set targets using clinical need, validated laboratory capability, local workload and applicable accreditation requirements. A target should be realistic enough to guide improvement but demanding enough to reveal variation. Review it when equipment, staffing, courier arrangements or testing algorithms change.

Find The Causes Behind Delays

A delayed result should trigger investigation rather than blame. Divide the pathway into pre-analytical, analytical and post-analytical intervals. Pre-analytical causes include incomplete requests, unsuitable specimens, late courier collection and transport temperature problems. Analytical causes may include instrument downtime, contamination, reagent shortages, repeat testing or referral to another service.

Post-analytical delays can arise from manual result entry, delayed authorisation, unclear escalation rules or difficulty contacting the treating team. In a busy Brisbane or Adelaide laboratory, a result may be technically available but wait in an electronic queue for verification. Separating “result available” from “report released” makes that bottleneck visible.

Use a simple delay code for each exception, such as transport, specimen quality, staffing, equipment, reagent, referral or communication. Review a small sample of delayed cases with the people who perform the work. A process map or run chart can show whether the problem is occasional or becoming a pattern.

For practical ideas on reducing waiting time in district services, staff can consult culture result guidance. Adapt any recommendation to the local workflow rather than copying a target from a laboratory with different transport distances or staffing.

Report Results For Action

A useful monthly report should fit on a page or dashboard and make the next decision clear. Show the number of specimens received, completed and excluded; median TAT; the selected percentile; target compliance; and the main delay categories. Display separate results for urgent and routine work, and distinguish referred tests from those completed on site.

Share trends with laboratory staff, clinicians, specimen-collecting services, couriers and public health teams. In Australia, a public laboratory may serve metropolitan hospitals, regional health networks and remote Aboriginal communities, each with different access and transport constraints. Reporting these groups separately supports fair interpretation and helps managers direct resources where they will have the greatest effect.

Use recommendations that connect directly to observed data:

Keep reports understandable to non-laboratory readers. “Median final culture TAT was 23 days; 88% met the 28-day target” is more useful than a raw spreadsheet of accession numbers. Include a short explanation when a result changes substantially, such as a new referral laboratory, a reagent interruption or seasonal transport disruption.

Govern, Review And Improve

TAT data should be part of the laboratory’s continual improvement cycle, with an owner, review frequency, target and action record. A quality meeting can examine the trend, confirm whether corrective action worked and assign a due date for unresolved issues. When a change is introduced, compare an appropriate baseline with the same type of specimens and time period.

The indicator should also be checked during internal audits and management reviews. A mock assessment using GLI checklists can help staff test whether definitions, records, authorisation steps and improvement actions are documented and traceable. This is particularly useful when preparing for NATA assessment against ISO 15189 or reviewing a mature quality system.

The reporting format below can be adapted to a local laboratory information system or spreadsheet.

Indicator Definition Recommended display
Receipt-to-result TAT Laboratory receipt to result availability Median, 75th percentile and target compliance
Collection-to-report TAT Specimen collection to authorised report Median, range and pathway breakdown
Analytical interval Test start to result availability Median by method and instrument
Reporting interval Result availability to report release Percentage within agreed limit
Data completeness Records containing all required timestamps Percentage and missing-field count
Delayed cases Records outside target Number, rate and coded cause

Review the indicator when the testing algorithm changes, a service moves to a new site or a new courier contract begins. A stable definition protects trend data, while a documented revision ensures that changes remain transparent.

Good TAT reporting turns routine timestamps into decisions about staffing, transport, equipment and communication. TB laboratory teams can start by defining one pathway, checking the data for a month and discussing the first set of findings with the services that send and receive specimens. From there, use the evidence to set a practical target, monitor it regularly and record each improvement action in the quality system.