GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Designing A TB Laboratory Poster For Handwashing And Hygiene

A well-designed TB laboratory poster turns a routine hygiene requirement into a clear action at the bench, sink, entry point or exit door. It should help staff remember what to do, when to do it and which method is appropriate, even during a busy shift or a high-pressure specimen run.

For laboratories working with sputum, cultures, molecular platforms and potentially infectious materials, hand hygiene is part of a wider risk-control system. A poster cannot replace training, personal protective equipment, engineering controls or supervision, but it can reinforce each of them at the moment a decision is made.

The strongest visual materials are brief, specific and easy to scan from a short distance. They use plain English, familiar images and consistent terminology. In Australia, that may mean designing for a metropolitan hospital in Melbourne as well as a small service supporting communities near Darwin, Cairns or regional Western Australia.

The GLI Quality Tool offers a useful quality management context for this work. Its phased roadmap and Quality Systems Essentials can help a laboratory connect a hygiene poster with safety, personnel, documentation, assessment and continual improvement rather than treating it as decoration on a wall.

Start With Risk And Audience

Begin by identifying where hand contamination is most likely to occur. In a TB laboratory, relevant moments may include entering the work area, before putting on gloves, after removing gloves, after handling specimens, after touching potentially contaminated surfaces and before leaving the laboratory. Include contact with phones, keyboards, centrifuges, cabinet handles and shared paperwork.

Identify the people who will use the poster. Experienced scientists may need a rapid reminder, while new staff, students, cleaners, couriers and visiting maintenance workers may need more context. If the laboratory supports rural or remote services, consider whether staff work across several roles and need a poster that remains understandable during interruptions.

Use a short audience statement during design, such as “For all staff handling TB specimens.” This avoids creating a poster aimed only at microbiologists when other workers may also enter the controlled area. If translation or accessibility support is needed, arrange it through the laboratory’s established process and retain the English version as the controlled master.

Make Hand Hygiene Steps Unmissable

A handwashing and hygiene poster should show a sequence rather than a block of policy text. A practical sequence can include wetting hands, applying liquid soap, rubbing palms and fingers thoroughly, cleaning thumbs and fingertips, rinsing, drying with a single-use towel and using the towel to turn off the tap where appropriate. Keep the wording aligned with the laboratory’s approved infection prevention procedure.

Show the duration or completion cue used by the organisation. Avoid adding a stopwatch if staff are expected to follow a different local standard. The poster should also distinguish soap and water from alcohol-based hand rub. Alcohol hand rub may be suitable when hands are visibly clean, while visibly soiled hands require washing with soap and water.

Use large illustrations with one action per panel. A red stop symbol can mark moments when hand hygiene is required, while a simple sink or dispenser icon can direct staff to the correct method. Avoid crowded anatomy diagrams, tiny labels and decorative imagery that competes with the action.

Design For Australian Laboratory Workflows

Australian laboratories operate across public hospitals, private pathology networks, university facilities and regional health services. A poster designed for a large central laboratory in Sydney may need adjustment before use in a small service in the Pilbara or a specimen collection setting in Tasmania. Confirm the available sink, soap dispenser, hand-rub station, paper towels and waste bin before finalising the artwork.

Use Australian spelling and workplace language, including “hand sanitiser” and “gloves”. Avoid assumptions about climate or building design. In tropical Queensland or the Northern Territory, humidity and frequent glove changes may affect dispenser placement and poster durability. In remote locations, supply interruptions may make it important to show both the hand-rub option and the soap-and-water option without suggesting that one can always replace the other.

Consider cultural safety and practical inclusion. Aboriginal and Torres Strait Islander health services may have established local communication preferences, community protocols and staff mixes that should inform review of the images and wording. Engage the relevant service or infection prevention team early, rather than sending a finished poster for approval at the end.

Connect Hygiene With Biosafety

Hand hygiene should appear alongside the actions that create the need for it. For example, a poster near a biological safety cabinet can remind staff to remove gloves safely, keep hands away from the face and perform hand hygiene after leaving the cabinet or laboratory work zone. It should never imply that gloves make hand hygiene unnecessary.

The cabinet itself needs a separate, controlled procedure covering airflow, sash position, work practices, decontamination and spill response. A practical biosafety cabinet guide can help the laboratory keep these instructions consistent with the hand hygiene message.

Place the poster where the action occurs, not only in a staff noticeboard area. A small version near the hand basin may provide the best prompt, while a second version near the laboratory exit can reinforce the final hand hygiene step. Use wipeable stock or a protective sleeve if the poster will be exposed to splashes or frequent cleaning.

Turn Guidance Into A Usable Job Aid

Treat the poster as a job aid with a defined purpose, owner and review date. Give it a document number or version identifier if the laboratory’s document control system requires one. Record the approved wording, image source, printing specification and locations where copies are displayed.

Keep the main poster focused on hand hygiene. Details about specimen transport, disinfectant contact times, respiratory protection or spill management should sit in linked procedures, wall guides or training materials. Staff should be able to understand the immediate hand hygiene action without reading several paragraphs.

Other job aids can be designed using the same principles of visible steps, local terminology and rapid troubleshooting. For example, a laboratory developing microscope troubleshooting guidance can use the poster project to establish a consistent visual style across safety and equipment materials.

Test The Poster Before Printing

Ask several people to use the draft in the actual laboratory. Include a senior scientist, a newer staff member, a cleaner or support worker where appropriate, and someone who was not involved in writing it. Observe whether they notice the poster, understand the sequence and identify the correct hand hygiene method without additional explanation.

Check the viewing distance, lighting, reflections, colour contrast and placement. A poster that looks clear on a computer screen may be difficult to read beside a stainless-steel sink. Confirm that the paper size, lamination or protective sleeve will not obstruct dispensers, emergency equipment or cleaning access.

A Practical Pre-Release Check

Use the first checklist to assess the content:

Then check the physical installation:

Maintain, Measure And Improve

A poster becomes part of the quality system when the laboratory checks whether it remains accurate and useful. Add it to the document review schedule, especially when infection prevention guidance, laboratory procedures, equipment or room layouts change. Replace damaged, faded or outdated copies promptly.

Assessment can be simple and proportionate. Supervisors might record whether posters are present during safety rounds, ask staff to explain when hand hygiene is required, or review observations from competency assessments. Avoid using the poster as a substitute for direct observation of technique where that is required by local policy.

The GLI Quality Tool’s Phase 4 resources are relevant when the laboratory is monitoring performance and pursuing continual improvement. A small finding, such as staff missing the poster because it is hidden behind a dispenser, can lead to a documented corrective action, a revised placement and a later check to confirm that the change worked.

Use feedback without blaming individuals. If several trained staff misunderstand a symbol, revise the symbol. If hand rub is repeatedly empty, address stock control and responsibility. If the poster is ignored during peak workload, consider whether the workflow, location or message needs to change.

A finished TB laboratory hygiene poster should make the safe action obvious, support the laboratory’s approved procedures and fit the realities of the workplace. Draft the message with the people who will use it, test it at the bench and sink, approve it through document control, then display it where the next decision happens. Use the resulting observations to keep the poster—and the broader quality management system—current.