GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Drafting a TB laboratory policy for verbal orders

A TB laboratory policy for documenting verbal orders is a quality management control, not simply a note-taking rule. It defines who may request testing, how a spoken instruction is confirmed, what must be recorded, and how discrepancies are corrected. The result is an audit trail linking the clinical request to the specimen, laboratory examination and reported result, while protecting positive patient identification and sample integrity.

Australian TB laboratory services are distributed across state and territory public health systems, major city hospitals in Melbourne and Sydney, regional services and Aboriginal and Torres Strait Islander health services. Specimens may travel considerable distances to Perth or Darwin, and paper forms may coexist with electronic medical records and laboratory information systems. A written policy therefore needs a consistent minimum standard for telephone or in-person requests, including after-hours cover and interstate consultations.

Local conversation can be brisk and familiar: a clinician may say, “Can you add a TB culture?” or “Just run a PCR on this sputum.” The policy should convert that conversational shorthand into an exact request naming the test, specimen, urgency and clinical context. It should also give staff a clear way to seek confirmation, document uncertainty, and escalate when the person taking the order is not the person who requested it.

Define scope, roles and evidence

A verbal order is a spoken instruction from an authorised clinical staff member to perform a defined laboratory test or related service. A confirmation is the requester’s explicit agreement to a read-back of that instruction. The policy should cover purpose, scope, definitions, responsible roles, accepted order types, documentation standards, exceptions, audit and review. It should identify which TB requests may be accepted verbally, who may take and authorise them, and which changes require written or electronic authorisation under local legislation, accreditation and clinical governance requirements.

Include diagnostic requests, add-on examinations, priority status and specimen-related instructions only where local rules permit. Clearly separate these from orders that alter an existing test, introduce a clinically significant discrepancy or lack enough information for safe release. Assign responsibility for every step so there is no ambiguity about who verifies identity, records the exchange and approves exceptions. The same minimum controls should apply whether the order is captured on paper or electronically:

Control point Paper record Electronic record
Patient and order details Completed requisition showing two identifiers, exact test, specimen and local date and time Structured fields with prompts for required information and automatic timestamps
Requester authentication Signature, role, credentials and verified callback details Role-based access, digital signature and authenticated contact details
Amendments Single strike-through, correction, initials and date Tracked change showing the original value, reason, author and timestamp
Specimen linkage Matching labels and accession number Barcode or accession link across the order, specimen and result
Downtime and reconciliation Numbered forms, secure transfer and later reconciliation Temporary queue or printable record with a reconciliation report

The phase-specific checklists can be used to map these controls to the relevant phase of the GLI roadmap. Keep the operational policy shorter than the supporting procedure: the policy sets mandatory rules, while a standard operating procedure, request form and escalation flow show staff how to comply.

Standardise the spoken order workflow

Only designated and competent laboratory staff should accept a clinical request. A receptionist or courier should not independently interpret medical orders unless local policy explicitly permits this and they have completed suitable training. Where possible, speak directly with the treating clinician. If the requester’s identity is uncertain, call back through an approved ward, clinic or hospital directory rather than a number supplied during the conversation, and record how the requester was authenticated.

Begin with positive patient identification using two identifiers, such as full name and date of birth, and state both back rather than relying on a bed, room or surname alone. Ask the requester to give the exact examination, specimen type, collection date and time, priority, and relevant treatment, exposure or travel information. Staff must not infer missing test names from conversational shorthand or replace a spoken request with an assumed routine.

Then use closed-loop communication: “You are requesting [test] on [specimen], with [priority] and [clinical detail]; is that correct?” The requester responds yes, no or corrected, and the outcome is recorded. For requests designated high-risk by the laboratory, amended orders or disputed details, obtain confirmation from a second authorised clinician or through an approved electronic authorisation. Where the original requester cannot be reached, follow the agreed escalation pathway rather than treating silence as consent.

Create a complete clinical record

Every entry should contain the date and local time, requester’s name, role and contact details, the person taking the order, patient identifiers, the read-back and confirmation outcome, test and specimen details, priority, and any escalation. Capture different timestamps separately: order time, collection time, specimen receipt and accessioning may not be the same. A complete record should allow an auditor to reconstruct who said what, what was agreed and what action followed.

Paper entries must be legible, dated, timed and signed. Make amendments transparently by striking through the error once, writing the correction, and adding initials and date. Electronic entries should retain the author, timestamp, previous value and reason for change through a controlled audit trail. A correction must never erase the original request, because reconstructing how a discrepancy arose supports investigation, corrective action and future training.

Connect the order to the physical specimen through the accession number, request form or barcode, and retain chain-of-custody and transport-temperature records where relevant. For interstate work, show the local date, time and time zone so a Perth request or Darwin collection is not confused with processing elsewhere. Record communication of critical or unexpected findings, including the recipient, date, time and escalation. Apply applicable privacy and retention requirements, and limit patient information on labels or calls to what staff genuinely need.

Implementation recommendations for Australian laboratories

Implementation works best when the policy is owned by the laboratory manager and quality lead, with practical input from TB program or infectious diseases staff, clinical teams, specimen collectors and information-system personnel. Include after-hours staff and relevant Aboriginal and Torres Strait Islander health services where specimens and clinical information cross organisational boundaries.

The GLI Quality Tool provides a practical framework for reviewing these controls across the twelve Quality Systems Essentials. Use the linked material as evidence within the laboratory’s quality management system, then record actions, owners and due dates in the continual improvement process.

Turn the policy into everyday practice

A usable policy should fit into a live workflow, not sit in a binder. Give staff the request form or electronic fields, a callback guide, an escalation roster and a downtime procedure at the point of use. Train new employees, assess their competency and brief agency or after-hours staff, then observe whether the read-back and documentation steps are actually followed.

Begin with a small pilot in one laboratory or ward, sample records after an initial 30 days and again by 90 days, and use the findings to refine the form and training. Track missing requester details, unidentified read-backs, amended orders, specimen mismatches and unresolved discrepancies. Share the results with clinical partners so feedback improves both laboratory documentation and the clarity of clinical requests.

Download the phase-specific checklists linked above, nominate the responsible policy owner, and complete a local gap review against the draft. Obtain approval through clinical governance, publish the final procedure, and schedule the first audit within 90 days so the standard becomes part of routine TB laboratory quality assurance.