GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Writing a practical TB specimen transport job aid

A job aid for TB lab staff on proper specimen transport and chain of custody should make the correct action easy to find at the moment it is needed. It is not a policy manual or a training textbook. It is a short, task-focused reference that supports consistent decisions when specimens move from a collection point to a testing laboratory.

Poor transport practices can produce leaked containers, incorrect patient identification, delayed testing, damaged packaging, and results that cannot be confidently linked to the right person. A well-designed aid helps prevent these failures by connecting collection, documentation, packaging, dispatch, receipt, and escalation in one clear workflow.

The content should fit the laboratory’s actual setting. Staff may work with sputum, gastric aspirates, or other respiratory samples; use motorcycles, public vehicles, or courier services; and operate with limited refrigeration, connectivity, or packaging supplies. The job aid must therefore state the essential requirements while showing what to do when normal conditions are unavailable.

Define the purpose and users

Begin by identifying who will use the document and which handoffs it covers. The primary users may include specimen collectors, nurses, couriers, reception staff, laboratory technologists, and supervisors. Each group needs different instructions, so use role labels such as “collector,” “dispatcher,” “courier,” and “receiving staff” rather than addressing an undefined “staff member.”

State the job aid’s purpose in one sentence. For example: “Use this guide to preserve specimen quality, protect people from exposure, and maintain traceability from collection through laboratory receipt.” This wording gives equal attention to biosafety, diagnostic quality, and chain of custody.

Limit the scope to activities the document can support reliably. It may cover specimen labeling, request forms, packaging, temperature control, transport time, handover records, receipt checks, and nonconformity reporting. Refer users to approved procedures for complex matters such as suspected spills, exposure incidents, dangerous goods classification, or transport across international borders.

The quality management framework can help the laboratory connect this job aid with document control, equipment management, assessment, personnel competency, and continual improvement. That connection prevents the aid from becoming an isolated handout that is difficult to review or enforce.

Map the workflow before writing

Observe how a specimen actually travels. Follow one sample from the patient or collection room to the testing bench, noting every person who handles it, every form completed, and every location where it waits. Compare the written standard operating procedure with real practice; the differences often reveal the most important content for the job aid.

Organize the document in chronological order. A useful sequence is: prepare, identify, collect, package, document, dispatch, transport, receive, verify, and escalate. Each step should answer three practical questions: What must the worker do? What evidence must be recorded? What should happen if the requirement is not met?

Use short action statements with observable verbs. “Write the patient name on the tube” is weaker than “Label the primary container before leaving the collection area using the approved unique identifier.” Include a visual cue for critical actions, such as checking that the label matches the request form before the container enters the secondary package.

Build in decision points rather than forcing staff to interpret broad instructions. For example, if the specimen container leaks, the receiving worker should know whether to isolate it, notify the supervisor, request recollection, disinfect the outer package, or reject the sample according to local policy. The job aid should direct the response without requiring a lengthy search through several documents.

Specify packaging and transport controls

Describe the minimum packaging arrangement in terms that staff can recognize. A typical system uses a leak-resistant primary container, absorbent material, a durable leak-resistant secondary container, and a rigid outer package. The exact requirements must follow national regulations, institutional policy, and the type of material being transported.

Explain how to protect the specimen from heat, freezing, sunlight, vibration, and prolonged delay. The aid should state whether the sample must be transported at ambient temperature or under a specified cold-chain condition, what carrier is approved, and the maximum time from collection to laboratory receipt. If a cooler is used, identify how it is cleaned, secured, monitored, and separated from food or personal belongings.

The comparison below can turn general requirements into quick decisions during dispatch and receipt.

Transport situation Required action Record or escalation
Correctly labeled, intact specimen within the approved time Accept for routine processing Record receipt time and receiver
Minor outer-package damage with primary container intact Isolate, disinfect if required, and notify the supervisor Document the event and disposition
Leaking or cracked primary container Do not open casually; manage as a spill or unsafe package under local procedure Record nonconformity and request guidance or recollection
Missing, mismatched, or unreadable identifier Hold the specimen and resolve identity before testing Document discrepancy and contact the responsible unit
Excessive delay or unsuitable temperature Assess specimen suitability using the approved rejection criteria Record condition, decision, and notification
Unsealed or incomplete package Secure only if safe and permitted; otherwise reject or escalate Record packaging failure and corrective action

Avoid promising that every compromised sample must be rejected. Some laboratories may have validated exceptions, while others may require recollection. The job aid should point to the approved acceptance and rejection criteria and require documentation of the decision.

Make chain of custody visible

Chain of custody is the documented history of who had responsibility for a specimen, when the handoff occurred, and what condition the package was in. It does not require complicated paperwork in every setting, but it does require consistent identifiers and reliable records. The specimen label, request form, transport log, and laboratory information system should use the same unique code whenever possible.

Include fields for collection date and time, patient or specimen identifier, specimen type, origin, destination, dispatch time, courier name, receipt time, receiver name, package condition, and any temperature or delay concern. If electronic systems are unavailable, provide a controlled paper log with a clear method for correction. Staff should draw a single line through errors, enter the correct information, and initial and date the change rather than erasing the original entry.

Each handoff should be acknowledged by the person releasing and the person receiving the package, according to local practice. A signature, initials, barcode scan, or secure electronic entry may be acceptable if it identifies the responsible person and preserves the time of transfer. The aid should state what to do when a courier arrives without the required documentation or when a package is left unattended.

Link chain-of-custody records to confidentiality requirements. Use the minimum patient information needed for safe identification, keep forms protected from public view, and avoid displaying sensitive information on the outside of the package. Staff should know whom to contact if a specimen is lost, opened by an unauthorized person, or delivered to the wrong location.

Design for rapid use at the point of work

Format the job aid so that a worker can scan it quickly while wearing gloves or working in a busy reception area. Use numbered actions within the aid if they clarify sequence, but avoid dense paragraphs, decorative language, and unexplained abbreviations. Place the most safety-critical requirements near the relevant action instead of hiding them in a general warning box.

Use consistent symbols, color coding, and terminology across versions. A red symbol might identify a stop-and-escalate condition, while a check mark could identify a required verification. Make sure the meaning remains clear in black-and-white printing and in low-resolution photocopies. Include simple illustrations of correct labeling, triple packaging, and placement of absorbent material when photographs or diagrams can reduce ambiguity.

Translate the job aid into the main working languages of the laboratory and test the wording with actual users. A translation that is technically accurate but unfamiliar to collectors can still cause errors. Ask staff to perform a simulated handoff using only the draft aid, then revise any step that causes hesitation, conflicting interpretations, or repeated requests for verbal clarification.

Control the document as a quality record. Include a title, document number, version, effective date, approving authority, and review date. Make obsolete copies easy to identify and remove. The resources available through the GLI Quality Tool can support a broader approach to document control, competency assessment, internal audits, and corrective action.

Recommendations for rollout and review

A job aid becomes useful when it is embedded in routine work rather than distributed without follow-up. Use these practices during development and implementation:

Train staff with examples of both acceptable and unacceptable specimens. Include exercises involving a mismatched form, a delayed courier, an unreadable label, and a damaged outer package. Supervisors should observe performance and record whether the worker follows the sequence without prompting.

Use monitoring results to improve the process, not to assign blame. If many samples arrive late, the problem may involve collection schedules or courier routes rather than individual carelessness. If labels frequently mismatch forms, the collection workflow or identifier system may need redesign. Document the issue, analyze its cause, assign an action, and verify whether the change reduced recurrence.

Put the job aid into daily practice

Post the current version where specimens are packed and received, provide a copy with transport supplies, and include it in orientation for new staff. Supervisors should periodically check that the displayed version matches the controlled master and that required packaging materials, labels, logs, and temperature-monitoring tools are available.

A strong job aid gives every worker the same reliable sequence: identify the specimen, protect its integrity, document each transfer, verify its condition, and act promptly when something is wrong. Draft the first version with the people who perform these tasks, test it during a real or simulated transport cycle, and release the approved version through the laboratory’s quality system.