GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Building Pipetting Precision Into TB Laboratory Practice

Accurate pipetting is a basic laboratory skill with a direct effect on tuberculosis testing. Small errors in liquid volume can alter reagent-to-specimen ratios, affect amplification reactions, change smear preparation quality, or produce inconsistent results between operators. When testing is repeated across many samples, a minor variation at each step can become a significant quality problem.

Training staff in proper pipetting techniques should therefore be treated as part of the laboratory’s quality management system rather than as a one-time orientation task. Competence depends on suitable equipment, clear procedures, supervised practice, routine observation, and records that show whether performance remains reliable.

The GLI Quality Tool offers a practical way to connect pipetting instruction with broader laboratory quality priorities. Its phased roadmap and Quality Systems Essentials can help TB laboratories organize activities related to personnel, equipment, documents, assessment, safety, and continual improvement, including in settings with limited resources.

Why Pipetting Consistency Matters In TB Testing

Pipetting variability may arise from inconsistent aspiration speed, incorrect immersion depth, poor tip attachment, premature dispensing, or failure to change tips between samples. Temperature, viscosity, foaming, and the condition of the pipette can also influence the delivered volume. These factors may be difficult to detect when staff rely only on final test results.

In molecular TB workflows, inconsistent liquid handling can affect extraction, reagent preparation, master mix distribution, and specimen transfer. In smear microscopy, an uneven volume of specimen or stain can influence slide quality and reading conditions. Culture and drug susceptibility testing procedures may also depend on carefully measured volumes and dilution steps.

A quality-focused laboratory defines which pipetting steps are critical, identifies the risks associated with each step, and establishes acceptable performance criteria. This approach directs training toward activities that could affect patient results, biosafety, turnaround time, or the use of scarce reagents.

Standardize The Work Before Training

Staff cannot perform consistently when each person uses a different technique. Before practical instruction begins, the laboratory should review its standard operating procedures and specify the correct pipette, volume range, tip type, aspiration method, dispensing method, and waste procedure for each task.

The procedure should explain how to check that the pipette is set to the intended volume, attach a tip securely, pre-wet the tip when appropriate, hold the pipette vertically during aspiration, and avoid bubbles. It should also define how far the tip enters the liquid, how long the operator pauses before dispensing, and where the liquid should be delivered.

Workstations should be arranged so that frequently used materials are easy to reach without crossing clean and contaminated areas. Pipettes, tips, tubes, racks, disinfectant, and waste containers should have designated locations. Clear labeling reduces interruptions and helps staff repeat the same sequence during every run.

Teach Technique Through Demonstration And Practice

A short demonstration should precede hands-on practice. The trainer can show correct posture, thumb control, tip immersion, aspiration, dispensing, and tip ejection while explaining why each movement matters. Demonstrating common mistakes is useful when the trainer immediately contrasts them with the correct method.

Practice can begin with water or another safe substitute before staff handle infectious material or expensive reagents. Trainees should repeat the task slowly, then at the pace required for routine work. The trainer should observe from the side and record specific behaviors rather than relying on a general impression that the operator appears confident.

Competency assessment should include both technique and understanding. A staff member should be able to identify the appropriate pipette, select a suitable volume, explain contamination-control measures, perform the task correctly, and respond to a problem such as a bubble, blocked tip, or suspected pipette malfunction.

Training Element What To Standardize Evidence Of Competence
Pipette selection Volume range, pipette type, compatible tips Correct equipment chosen for the task
Aspiration Tip depth, vertical position, plunger control, speed Smooth uptake without bubbles or splashing
Dispensing Contact point, pause time, blow-out technique Complete and controlled delivery
Contamination control Tip changes, clean-to-dirty workflow, waste handling No cross-contamination behaviors observed
Equipment care Storage, cleaning, inspection, calibration status Pipette handled and stored correctly
Assessment Observation checklist, practical test, retraining trigger Approved result documented by an authorized assessor

Connect Training With Personnel Records

A training program becomes more reliable when the laboratory can show who was trained, which procedures were covered, who assessed competence, and when reassessment is due. Records should distinguish between attendance and demonstrated competence. Signing a register confirms participation; it does not prove that pipetting was performed correctly.

Useful documentation may include the staff member’s role, training date, procedure name, trainer, assessment method, result, identified gaps, corrective action, and date for follow-up. Records should be easy to retrieve during an internal audit, supervisory visit, investigation, or review of an unexpected result.

In a high-volume TB reference laboratory, organized documentation is especially important because staff may work across shifts, testing platforms, and specimen streams. Guidance on personnel records can help laboratories maintain evidence of authorization, competency, and ongoing training without creating unnecessary administrative complexity.

Retraining should be triggered by more than an annual calendar. It may be needed after a new pipette or assay is introduced, a procedure changes, a staff member returns after a long absence, an error is detected, or monitoring shows an emerging pattern of variable results. The laboratory should define these triggers in its quality documents.

Verify Pipette Performance And Technique

Good technique cannot compensate for equipment that is damaged, contaminated, incorrectly adjusted, or overdue for calibration. Each pipette should have an identification number, an assigned storage location, a maintenance history, and a defined calibration or performance verification interval based on manufacturer guidance, workload, and risk.

Before use, staff should inspect the body, plunger, shaft, tip cone, and seals for visible damage. They should confirm that the volume setting is within the permitted range and that tips fit securely. A pipette that has been dropped, exposed to contamination, or producing unusual resistance should be removed from service until it is checked.

Laboratories may use gravimetric checks, reference measurements, or other validated approaches to assess accuracy and precision. The method should be suitable for available resources and should specify acceptance limits, test frequency, responsible personnel, and actions when results fall outside those limits. Results should be reviewed for trends rather than treated as isolated pass-or-fail events.

Internal quality control can reinforce pipetting training. For example, repeated measurements of a known volume can show whether a staff member or pipette is producing systematic bias or excessive spread. When a problem appears, the investigation should consider technique, equipment, tips, environmental conditions, and the written procedure before assigning blame.

Monitor The Whole Workflow

Pipetting errors can be linked to upstream or downstream conditions. A specimen that arrives late, leaks, dries out, or reaches the laboratory at an unsuitable temperature may create handling difficulties that increase the chance of inaccurate transfer. Monitoring transport conditions therefore supports the same goal as improving liquid-handling technique: preserving reliable results from collection through reporting.

Laboratories can use a simple log to record dispatch and receipt times, package condition, temperature where relevant, delays, rejected specimens, and corrective actions. A practical specimen transport log can help teams identify recurring problems that influence workload, urgency, and the consistency of specimen processing.

Supervisors should periodically observe routine work after initial competency approval. Direct observation can be scheduled during different shifts and for different assays, since staff may change their technique under time pressure. Short observation sessions are often more useful than infrequent comprehensive reviews.

Performance data should be discussed constructively. Useful indicators may include invalid or repeated test rates, pipette verification failures, contamination events, documentation gaps, and deviations identified during internal audits. Trends should lead to targeted action, such as refresher practice, revised workstation layout, equipment servicing, or clarification of a confusing procedure.

Make Pipetting Competence Routine

Pipetting training is most effective when it becomes part of everyday laboratory management. The following practices help maintain consistency:

A phased quality improvement approach allows the laboratory to begin with essential controls and strengthen them over time. One site may first standardize technique and documentation, while another may prioritize pipette verification or supervision because of a recent testing error. The important point is to record the current state, select practical actions, and review whether those actions reduced variation.

Laboratory leaders should provide time for practice, maintain adequate supplies of compatible tips, protect equipment from avoidable damage, and recognize staff who identify risks early. These management decisions make accurate pipetting achievable even when workloads are high and resources are constrained.

Use the GLI Quality Tool to place pipetting competency within a broader improvement plan for your TB laboratory. Define the critical steps, train and observe staff, verify equipment, document decisions, and review performance data regularly so that reliable liquid handling becomes a dependable part of every test.