GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Standardizing Sputum Collection in TB Laboratories

Reliable tuberculosis testing begins before a specimen reaches the laboratory. A poorly collected, mislabeled, contaminated, or delayed sputum sample can produce an invalid result, reduce sensitivity, and force a patient to repeat the process. Standardized collection procedures help laboratories protect specimen quality while making the experience clearer for patients and health workers.

A useful procedure must work in the actual setting where samples are obtained. It should account for available containers, ventilation, transport routes, staff capacity, language, privacy, and the testing method used. A molecular test, smear microscopy workflow, or culture service may have different volume, timing, and transport requirements, so local instructions should align with the applicable national algorithm and manufacturer guidance.

Quality management turns these expectations into routine practice. The quality management framework can help a TB laboratory connect specimen collection with defined responsibilities, controlled documents, safety measures, assessment, and continual improvement rather than treating collection as an isolated task.

Define The Standard Before Training Staff

Begin with a written standard operating procedure that describes the complete path from patient identification to receipt in the testing area. Include eligibility, patient preparation, collection location, specimen type, container requirements, labeling, packaging, transport, rejection criteria, and documentation. Use direct language and describe what staff should do when the preferred process is not possible.

The procedure should distinguish sputum from saliva. Sputum is produced from the lower respiratory tract and is usually thick, mucoid, or purulent, while saliva is thin and watery and may be unsuitable for testing. Staff should explain that the patient needs to take a deep breath, cough deeply from the chest, and deposit material directly into the container without touching its inside or the lid.

Set specimen timing and quantity according to the diagnostic algorithm. Some programs request one specimen, while others use spot and early-morning specimens or repeat collection. State the required volume, commonly within a program-defined range such as 2–5 mL, without allowing an arbitrary volume rule to override the testing platform’s instructions.

Prepare Patients And Collection Areas

Patient instructions should be short, consistent, and available in the languages used by the community. Explain why the specimen is needed, demonstrate the sequence if appropriate, and confirm that the patient can repeat the key steps. Written or illustrated instructions can support verbal counseling, especially where literacy varies.

Collection should take place in an open-air or well-ventilated area designed to reduce exposure to infectious aerosols. It should be away from waiting rooms, food preparation areas, children, and crowded walkways. A designated space also improves privacy and makes it easier to clean surfaces and manage spills.

The collector should verify the patient’s identity using the local identification procedure before handing over the container. The container should be sterile or approved for the test, leak-resistant, wide-mouthed, clearly marked, and easy to open and close. Staff should avoid pre-labeling containers in a way that could cause patient mix-ups; labels should be applied and checked against the request form at the point of collection.

Control Identification And Documentation

Every specimen needs a unique identifier that links the container, request form, laboratory register, and electronic record when one is used. At minimum, record the patient identifier, date and time of collection, specimen sequence when multiple samples are requested, requesting location, and test requested. Record the collector’s identity or code so deviations can be traced and coaching can be targeted.

Use a two-person or two-step verification process where feasible: compare the patient’s identifiers with the request form, then compare the label with the form before the sample leaves the collection point. Never rely on room number, appearance, or memory. Correcting a label after collection can create an unsafe chain of assumptions, so the procedure should define when a sample must be recollected instead.

The register should capture more than test results. Useful collection indicators include the number of samples received, proportion rejected, reasons for rejection, transport delays, insufficient volume, saliva-only specimens, leaking containers, and mismatched identifiers. Reviewing these data reveals whether problems originate with counseling, supplies, transport, or laboratory reception.

Protect Specimen Integrity During Transport

Immediately after collection, the container should be closed firmly and inspected for leakage or external contamination. The request form should be kept separate from the specimen container in the designated transport packaging. Packaging must follow applicable infectious substance, occupational safety, and national transport requirements.

Define a maximum interval and acceptable temperature range between collection and processing for each test method. If immediate testing is unavailable, the SOP should explain temporary storage, dispatch schedules, use of cool conditions where required, and what to do after a delay. These instructions must be practical for the facility rather than copied from a setting with different infrastructure.

Control point Standard practice Evidence to retain
Patient verification Confirm identifiers before collection and before dispatch Request form and register entry
Container Use an approved, leak-resistant, wide-mouthed container Stock and lot records
Specimen quality Collect deep respiratory sputum, not saliva; meet the defined volume Collection checklist
Labeling Match the unique identifier, date, time, and specimen sequence Labeled container
Packaging Separate paperwork from the specimen and secure the package Dispatch log
Transport Follow defined time, temperature, and route requirements Courier or transport record
Receipt Inspect condition, accept or reject using written criteria Accession and rejection log

At receipt, trained laboratory staff should inspect the package, label, container condition, specimen appearance, volume, and paperwork. Rejection decisions should be consistent and documented. When safe and clinically appropriate, the requesting service should be contacted promptly to arrange recollection rather than silently processing a compromised sample.

Build Safety Into Every Collection Step

Collection procedures should be based on a documented risk assessment. Staff need clear instructions for respiratory protection, hand hygiene, cleaning, waste disposal, spill management, and exposure reporting. Personal protective equipment should support, not replace, ventilation and administrative controls.

The patient should be instructed not to open the container after depositing the specimen. Staff should avoid vigorous shaking, unnecessary handling, or opening containers outside the designated laboratory area. If a spill occurs, restrict access, allow aerosols to settle where the local protocol requires it, and apply the approved disinfection and incident-reporting process.

The safety section should identify who is authorized to collect sputum, who may receive it, and who can respond to a damaged container or exposure. New staff should demonstrate the procedure under supervision before working independently. Refresher training is appropriate after a safety incident, a change in testing technology, or evidence of repeated collection errors.

Verify Competence And Improve The Process

Training attendance does not prove that collection has been standardized. Competency assessment can include direct observation, a checklist, review of completed forms, simulated labeling exercises, and discussion of rejection scenarios. Assessors should document both correct actions and gaps requiring follow-up.

Laboratories can use internal audits to review a sample of collection records and compare them with received specimens. Important measures include rejected specimens per 100 received, mislabeled or unlabeled samples, saliva-only specimens, median transport time, delayed results caused by recollection, and the percentage of staff assessed as competent.

External comparison adds another perspective. The external quality assessment guidance explains how EQA can contribute to TB laboratory performance, but collection indicators still need local review because an EQA sample may not represent routine patient-facing collection problems. Use findings to identify system causes rather than assign blame to individuals.

Practical Controls For Daily Consistency

A small set of visible controls can make the written procedure easier to follow during busy clinics. Post a patient-facing collection guide at the collection point, keep approved containers and labels together, and use a simple checklist at specimen reception. Supervisors should observe the workflow periodically and discuss errors promptly while the circumstances are still clear.

Prioritize the following actions:

The user instructions provide practical direction for navigating phase-specific quality improvement materials and checklists. Laboratories can use that structure to assign actions, document evidence, and monitor progress instead of leaving collection improvements as informal reminders.

Turn The Procedure Into Routine Practice

Standardization succeeds when every person involved understands the same sequence and has the supplies, space, supervision, and feedback needed to follow it. A controlled SOP, consistent patient communication, secure specimen transport, and useful performance data create a reliable chain from cough to result.

Start by observing the current workflow, documenting the largest risks, and comparing practice with the approved requirements for the local TB testing algorithm. Then revise the procedure, train the relevant staff, measure early indicators, and use audit findings to close gaps. Embed the final process in the laboratory quality system so safe, high-quality sputum collection becomes an everyday operational standard.