GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Building a Clear TB Laboratory Sample Rejection Policy

A tuberculosis laboratory sample rejection policy protects patients, staff and test reliability. It defines when a specimen cannot be processed, explains the reason in plain language, and ensures that the requesting service knows what to do next. A consistent approach is especially important when samples move between general practices, hospitals, collection centres and specialist reference laboratories.

Australian laboratories may receive sputum from metropolitan hospitals in Sydney or Melbourne, rural services with limited transport schedules, or remote communities where recollection is difficult. A practical policy must therefore balance strict quality requirements with clinical urgency, biosafety and equitable access. The GLI Quality Tool provides a useful framework for building this process into a broader quality management system.

Define The Purpose And Scope

Begin by stating why specimens may be rejected. The central reasons are patient safety, preservation of test accuracy, protection of laboratory staff and prevention of avoidable delays. The policy should apply to all TB-related specimens, including sputum, induced sputum, bronchoalveolar lavage, gastric aspirates, tissue, cerebrospinal fluid and other validated sample types.

Specify which areas are covered. This may include collection, labelling, packaging, transport, reception, accessioning, testing, storage and disposal. Include specimens referred to another facility, because a sample that is acceptable for one method may be unsuitable for another. For example, a specimen may be adequate for molecular detection but insufficient for culture because its volume is too small.

The document should identify the responsible roles. Collecting staff, couriers, specimen reception officers, scientists, supervisors and clinicians each need to understand their part in the process. In Australia, the policy should align with the laboratory’s NATA accreditation requirements, relevant RCPA guidance, state or territory public health procedures and workplace health and safety obligations.

Set Specific Rejection Criteria

Avoid vague wording such as “poor-quality sample” unless the policy defines exactly what that means. Criteria should be observable, measurable and linked to a decision. Common reasons include an unlabelled container, a mismatch between the request form and the specimen, a leaking package, an incorrect container, insufficient volume, an unsuitable transport medium or a sample received after a stability limit.

Clinical criteria need careful handling. Saliva instead of lower-respiratory-tract sputum may be unsuitable for some investigations, but immediate rejection can be harmful when recollection is difficult or the patient is seriously unwell. The policy can distinguish between absolute rejection, conditional acceptance and acceptance with a comment. A senior scientist or pathologist should be authorised to approve exceptions and record the rationale.

Sample integrity also depends on transport conditions. Delayed delivery, excessive heat, freezing where it is not validated, or inadequate triple packaging can affect the result or create a hazard. Laboratories serving remote areas of Western Australia, the Northern Territory or Queensland may need separate acceptance windows for courier routes. These arrangements should be validated rather than assumed.

Make Decisions Consistent At Reception

A reception checklist helps staff apply the same rules on every shift. It should prompt verification of patient identifiers, specimen type, collection date and time, container condition, request details, transport packaging and requested tests. The checklist should also provide a clear escalation route when a criterion is uncertain.

The decision should be recorded at the point of receipt, before the specimen disappears into routine workflow. Use standard rejection codes, such as “unlabelled,” “leaking,” “insufficient volume,” “incorrect container” or “delayed transport.” A free-text field can capture important clinical details, but coded data make trends easier to analyse.

Staff should never open a damaged or leaking package as though it were routine work. The procedure must describe containment, decontamination, personal protective equipment and notification of the supervisor. For infectious substances, Australian work health and safety requirements and local transport rules should be incorporated into the laboratory’s biosafety procedures.

Communicate With The Requesting Service

A rejected specimen is a clinical communication event, not just an administrative transaction. Notify the requesting clinician or service promptly, explain the specific reason, and state whether recollection is required. The message should identify the patient using approved identifiers without exposing unnecessary information through unsecured channels.

Provide practical collection advice. A request for “new sputum” is less useful than instructions about the appropriate container, acceptable volume, collection timing, sealing and delivery. If the patient is in an emergency department, an inpatient ward or a remote Aboriginal health service, the laboratory should make clear whether an alternative sample can be considered.

A documented exception process prevents inconsistent decisions. If the clinical team asks the laboratory to process a specimen that fails a standard criterion, record who authorised the exception, why it was necessary, what limitations were communicated and whether the result should carry a comment. The GLI user instructions explain how to work through the resource’s quality improvement materials and can support staff training around these decisions.

Record, Review And Improve

Every rejection should create a traceable record in the laboratory information system or controlled paper log. Minimum fields should include patient and accession identifiers, date and time received, specimen type, rejection reason, staff member, notification details, recollection outcome and any authorised exception. Retain records according to the laboratory’s document-control and retention requirements.

Review the data regularly by ward, collection site, courier route, specimen type and rejection reason. A high rate of leaking containers may indicate packaging or staff training problems. Frequent mismatched identifiers may point to bedside labelling practices. Repeated delays from a regional route may require revised pickup times or a validated transport arrangement rather than repeated reminders to clinicians.

Use trends in management review and corrective action. Set a baseline, define a realistic target and assess whether changes reduce rejected samples without weakening safety. The downloadable quality materials can help laboratories organise checklists, forms and improvement activities within a structured quality management system.

Support The Policy With Training And Tools

A policy works when staff can use it quickly under pressure. Create a one-page reception guide, a detailed controlled procedure and a communication template for requesting services. Include photographs or examples of acceptable and unacceptable packaging where appropriate, while ensuring that images do not expose patient information.

Training should cover specimen acceptance, biosafety, incident reporting, documentation and respectful communication. New staff should demonstrate competence before working independently, and existing staff should receive refresher training after a policy change or a significant incident. Competency records should include observation, case review or a short assessment rather than attendance alone.

Waste management is part of the wider workflow. Rejected TB specimens must be held, returned or disposed of safely according to validated procedures. Laboratories reviewing equipment for infectious waste treatment can consult this guidance on autoclave selection, including considerations relevant to validation and routine operation.

Practical Controls For Daily Use

Use a reception checklist that verifies:

Include these fields in the rejection record:

A well-designed policy should be easy to find, easy to apply and simple to audit. Place the current version in the laboratory document system, provide controlled copies at specimen reception and make sure external collection partners receive updates. Review it after incidents, changes to testing platforms, new courier arrangements or updated public health requirements.

For Australian services, local adaptation matters. A tertiary hospital in Melbourne may need rapid same-day escalation for suspected multidrug-resistant TB, while a small service near Alice Springs may need an agreed process for holding specimens until the next safe transport opportunity. Both settings require the same principles: defined criteria, documented judgement, safe handling and clear communication.

Implement the policy through a short pilot, audit the first month of decisions, discuss ambiguous cases with the clinical and quality teams, and revise the wording where staff interpret criteria differently. Once approved, monitor rejection rates and recollection outcomes as quality indicators. A transparent process gives clinicians confidence, helps patients receive appropriate testing sooner and strengthens the laboratory’s overall quality management system.