GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Building A TB Laboratory Internal Audit Schedule

A reliable internal audit programme gives a tuberculosis laboratory a practical way to check whether its quality management system works in daily operations. It turns policies, registers and technical procedures into evidence that staff can review, discuss and improve. For a TB service, the programme should cover the entire testing pathway, from specimen reception and microscopy through culture, molecular testing, reporting and referral.

The GLI Quality Tool provides a useful framework for this work. Its four-phase roadmap is organised around twelve Quality Systems Essentials (QSEs), allowing laboratories to begin with foundational controls and progressively strengthen performance. A schedule built around these essentials is easier to manage than a long, disconnected list of compliance checks.

An effective audit calendar also needs to reflect local conditions. A public laboratory in Sydney or Melbourne may have dedicated quality staff and automated molecular platforms, while a regional service in Queensland, Western Australia or the Northern Territory may rely on shared personnel, courier transport and remote technical support. The schedule must be realistic for the laboratory’s workload, staffing and available resources.

The aim is to implement a TB lab internal audit schedule covering all quality systems essentials without turning auditing into a paperwork exercise. Each audit should produce clear findings, assign responsibility and lead to timely corrective action. When the cycle is repeated, the laboratory gains a reliable picture of its risks and its progress.

Set The Scope Around The Twelve Essentials

Start by mapping every QSE to the activities carried out in the laboratory. The areas include organisation, personnel, equipment, purchasing and inventory, process control, information management, documents and records, customer focus, assessment, occurrence management, continual improvement, and facilities and safety. This mapping prevents heavily visible technical processes from receiving all the attention while less obvious controls remain untested.

Create an audit matrix showing each essential, the related procedures, the person responsible and the evidence that will be reviewed. For example, personnel auditing may examine competency assessments, training records and supervision. Equipment auditing may cover maintenance, calibration, temperature monitoring, breakdown records and decontamination. Facilities and safety checks should include biological safety practices, waste handling, incident reporting, spill response and access controls.

The scope should include pre-analytical, analytical and post-analytical work. Review specimen identification, rejection criteria, transport conditions, biosafety cabinet use, smear preparation, staining, culture handling, nucleic acid amplification, result authorisation and referral of unusual findings. Include satellite sites and collection points where they influence TB testing quality. This is particularly important across large Australian health networks, where a specimen may travel between a regional hospital, a central laboratory and a reference service.

Use A Risk-Based Audit Frequency

A yearly master schedule can assign each QSE a planned frequency, but the timetable should be risk based rather than evenly divided. High-risk processes such as specimen identification, contamination control, culture incubation, molecular result interpretation and biosafety deserve more frequent review. A quarterly check may be appropriate for these areas, while document control or supplier review might be audited twice a year if performance is stable.

Use a combination of comprehensive, focused and follow-up audits. A comprehensive audit can examine several connected QSEs, such as process control, equipment and personnel competency. A focused audit can investigate one risk, such as inconsistent smear grading or delays in reporting positive results. A follow-up audit confirms whether corrective action has been completed and whether it has solved the underlying problem rather than simply closing the finding.

Set triggers for an unscheduled audit. These may include a serious incident, repeated quality control failure, a change in test platform, a new reagent supplier, staff turnover, an external assessment finding or a sudden rise in rejected specimens. A laboratory serving remote communities may also need a review after extended transport disruption, extreme weather or changes to courier routes. The Australian financial year can provide a convenient point for reviewing the annual programme, but audits should follow clinical risk rather than administrative dates.

Assign Auditors And Define Evidence

Auditors should be sufficiently independent from the work being assessed and competent in the subject under review. In a small laboratory, complete independence may be difficult, so the service can use a trained auditor from another section, a partner laboratory or a central quality team. Cross-auditing between laboratories in a state network can strengthen consistency while sharing practical solutions.

Prepare an audit plan that states the scope, criteria, dates, auditor, areas to visit and records to sample. Criteria may include approved procedures, the GLI Quality Tool, local policies, manufacturer instructions, laboratory safety requirements, NATA accreditation expectations and ISO 15189 principles. Tell staff what will be reviewed, while avoiding a performance designed only for the audit day.

Evidence should come from observation, interviews, document review and record sampling. Follow a specimen through the workflow, inspect equipment labels and maintenance records, observe hand hygiene and containment practices, and compare reported results with worksheets or electronic records. Sampling should be large enough to reveal patterns. Reviewing one temperature log or one competency record rarely demonstrates sustained control.

Keep findings factual and traceable. Record the requirement, the evidence observed, the risk, the responsible person and the due date. Classify findings consistently, such as critical, major, minor or opportunity for improvement, using definitions approved by the laboratory. Clear wording helps staff respond constructively and gives managers reliable information for trend analysis.

Standardise Technical Observations Across Sites

Technical audits are more useful when different staff apply the same criteria. Microscopy is a good example: differences in smear preparation, staining quality, grading thresholds or documentation can create variation between readers and locations. A laboratory network should agree on reference images, reading rules, competency expectations and escalation arrangements before comparing performance.

A practical visual smear guide can support consistent training, supervision and audit observations. Auditors can use it to compare local practice with an agreed standard, while recognising that the guide must be controlled, versioned and available at the workbench. Evidence may include blinded rechecking, competency results, corrective coaching and records of periodic review.

For networks spanning Melbourne, Brisbane and remote areas, audit forms should use the same definitions and fields. A central laboratory can compare trends without assuming that every site has identical equipment or workload. The audit should distinguish between a genuine process failure and a limitation caused by transport, power supply, staffing or instrument availability.

Standardisation also matters for molecular testing and culture. Review internal quality control, invalid and indeterminate results, contamination rates, lot verification, environmental monitoring and referral pathways. When the laboratory changes a platform or reagent, schedule a focused audit after implementation rather than waiting for the next annual review. The standardised reading criteria can help laboratories align interpretation across a network and support defensible competency assessments.

Turn Findings Into Measurable Improvement

An audit has limited value if the report is filed without action. For every finding, identify the immediate correction and the root cause. A missing temperature record might require a replacement form, but the root cause could be unclear responsibility, an inconvenient recording location, inadequate training or an unreliable monitoring device. Corrective action should address the cause and specify how success will be demonstrated.

Use an action register with the finding, risk rating, owner, due date, required resources and verification method. Managers should review overdue actions at quality meetings and escalate high-risk issues promptly. If a corrective action requires an Australian supplier, instrument engineer or external reference laboratory, record the dependency and the interim control used while waiting.

Verification should be evidence based. Examples include three months of complete temperature logs, improved competency results, reduced specimen rejection, lower contamination rates or documented completion of preventive maintenance. Close an action only after an authorised reviewer confirms that the control is working. If the issue remains, revise the action rather than repeatedly extending its due date.

At least annually, analyse audit results across all twelve QSEs. Look for repeated findings, under-audited areas, differences between sites and links with complaints, incidents, external quality assessment or turnaround time. Feed these results into management review and the next audit calendar. This creates a continual improvement cycle that supports accreditation readiness and safer TB testing without separating quality work from routine laboratory practice.

Adopt the schedule as a controlled document, brief every relevant staff member and place the first audits in the laboratory calendar. Use the GLI Quality Tool checklists to select practical evidence, assign trained auditors and review actions at regular quality meetings. A consistent cycle of planning, observation, reporting and verification will help Australian TB laboratories build confidence in their results and respond quickly when risks emerge.