GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Building a reliable TB laboratory equipment maintenance tracking system

Reliable equipment is central to accurate tuberculosis testing. Microscopes, biosafety cabinets, incubators, centrifuges, autoclaves, refrigerators, GeneXpert instruments, computers, and backup power systems all require planned attention. When servicing is recorded informally or only after a breakdown, laboratories face interrupted testing, compromised specimens, invalid results, and avoidable safety risks.

A maintenance tracking system turns scattered reminders into a controlled process. It shows what equipment exists, what service each item requires, who is responsible, when work is due, and whether the instrument is safe to return to use. The system can be paper-based, electronic, or a combination, provided that records are complete, accessible, and routinely reviewed.

The GLI Quality Tool offers a useful framework for this work through its four-phase roadmap and twelve Quality Systems Essentials. Equipment management should connect with document control, personnel responsibilities, purchasing, assessment, laboratory safety, and continual improvement rather than operate as an isolated administrative task.

Define the equipment covered by the system

Begin with a physical inventory. Walk through every room and record equipment used for specimen reception, preparation, testing, waste treatment, storage, information management, and environmental control. Include support items such as voltage stabilizers, generators, air conditioners, thermometers, temperature data loggers, and water systems when their performance affects testing quality.

Assign every asset a unique identification code. A simple code can combine the laboratory abbreviation, equipment category, and serial number, such as TB-LAB-CAB-004 for a biosafety cabinet. Attach a durable label where it can be seen without obstructing vents, controls, certification marks, or manufacturer information.

The inventory should capture the manufacturer, model, serial number, location, supplier, installation date, warranty status, and operating purpose. Also note whether the item is critical to testing, whether a backup exists, and whether specialized service support is available locally. This information helps determine maintenance priorities and realistic response times.

Create a complete equipment register

The equipment register is the central source of truth for maintenance scheduling. Each asset should have a record that links its identity to its maintenance requirements, operating instructions, qualification documents, breakdown history, and service reports. Keep current versions controlled so staff do not rely on outdated procedures or manufacturer instructions.

Useful fields include the maintenance task, frequency, last completed date, next due date, responsible person, external service provider, required spare parts, and status. Status options such as “scheduled,” “awaiting parts,” “overdue,” “out of service,” and “released for use” make the register easier to review.

A spreadsheet may be sufficient for a small laboratory if it includes protected formulas, controlled access, and regular backups. Larger services may use a laboratory information system, computerized maintenance management system, or shared database. The technology matters less than clear ownership and a reliable method for recording changes.

Define who updates the register. A laboratory equipment officer may coordinate the schedule, while section supervisors verify completion and the quality manager reviews trends. Staff should know how to report a malfunction, request service, attach evidence, and escalate an overdue critical task.

Set risk-based maintenance intervals

Do not assign every item the same frequency. Use manufacturer recommendations as the starting point, then adjust for local conditions, workload, failure history, environmental stress, and the consequences of inaccurate performance. A high-use centrifuge or temperature-sensitive storage unit may need more frequent checks than a lightly used device.

Separate routine user checks from preventive maintenance and formal calibration or certification. For example, users may inspect a centrifuge before each run, staff may clean and check it weekly, a technician may service it every six months, and an accredited provider may calibrate it annually. These activities should have distinct records and acceptance criteria.

Equipment or system Routine user check Planned service or verification Escalation trigger
Biosafety cabinet Check airflow indicator, alarms, and visible damage before use Certification at the required interval and after relocation or major repair Alarm, failed certification, or damaged sash
Centrifuge Inspect rotor, buckets, lid, and unusual noise before use Cleaning, balance verification, and technician service Vibration, overheating, or cracked rotor
Refrigerator or freezer Record temperature and inspect alarm status daily Preventive service and thermometer verification Temperature outside limits or alarm failure
Molecular testing instrument Run required startup checks and inspect consumables Manufacturer service, calibration, and software review Failed internal control or recurring error code
Autoclave Check cycle parameters and indicators for each relevant load Performance verification and preventive service Failed indicator, pressure fault, or incomplete cycle

Risk classification should be documented rather than assumed. Consider patient impact, biosafety implications, availability of alternatives, downtime consequences, and the likelihood of failure. A risk score can help prioritize limited funds, but staff should retain the ability to suspend equipment immediately when safety or result validity is in doubt.

Turn the schedule into a daily workflow

A schedule works when it is visible and connected to routine laboratory operations. Display upcoming tasks on a controlled calendar, dashboard, or paper planner. Use reminders before the due date, with a second alert for overdue work. Assign a named person rather than a department alone, while retaining a supervisor who can confirm completion.

Each maintenance event should produce evidence. A completed record can include the date, equipment identification code, task performed, findings, measurements, parts replaced, provider or staff member, and next due date. Attach a service report, calibration certificate, photograph, or test result when appropriate.

After maintenance, assess whether the equipment is fit for use. The responsible person should check that repairs were completed, safety features operate, required quality controls pass, and affected tests are reviewed if equipment was found to be malfunctioning. A clear “out of service” tag prevents accidental use during repair or investigation.

Prepare contingencies for critical instruments. The procedure should state how specimens are stored, where testing is referred, who authorizes referral, and how results are communicated when an instrument is unavailable. This protects continuity of service without encouraging staff to use equipment that has not been verified.

Control overdue work and breakdowns

Overdue maintenance should trigger action, not simply change the color of a spreadsheet cell. The supervisor should assess the risk of continued use, arrange service, document an approved extension when justified, or remove the equipment from operation. Extensions need an expiry date and a named approver.

Breakdowns require a linked incident record. Record the reported symptom, date and time, user, immediate action, effect on specimens or results, technical diagnosis, corrective work, and release decision. If testing may have been affected, identify potentially impacted runs and follow the laboratory’s procedure for nonconforming work.

Review recurring failures for patterns. Repeated temperature excursions may indicate inadequate power protection, poor room conditions, or an unsuitable refrigerator. Frequent centrifuge faults may reflect overloading, incorrect balancing, or insufficient user training. Corrective action should address the underlying cause instead of repeatedly replacing the same component.

Use records to support quality improvement

Maintenance data can become a practical quality indicator. Track the percentage of preventive tasks completed on time, number of overdue critical items, average downtime, repeat breakdowns, service response time, and calibration failures. Review results monthly or quarterly, depending on workload and risk.

Trend data should be discussed during quality meetings and management reviews. A rise in overdue work may signal staffing or procurement problems. Long delays for a particular supplier may justify a service agreement, spare-parts stock, or a different equipment model. These decisions are stronger when supported by documented evidence.

The system should also support internal assessments. Auditors can trace an asset from its register entry to its maintenance record, service certificate, user check, and release decision. If gaps are found, record them as opportunities for corrective action and monitor whether the response actually improves reliability. Laboratories can share your feedback with the GLI Quality Tool team to help strengthen practical quality resources for varied settings.

Connect maintenance with safety and staff competence

Maintenance procedures must account for biological, chemical, electrical, mechanical, and ergonomic hazards. Before staff clean, open, decontaminate, or repair equipment, define required personal protective equipment, isolation steps, decontamination requirements, and waste disposal methods. External technicians should receive site safety instructions before entering laboratory areas.

Training should cover routine care, warning signs, reporting routes, and actions when equipment fails. New staff should demonstrate competence before independent use, while refresher training should follow major repairs, procedure changes, or repeated user errors. A practical safety checklist can help laboratories connect equipment checks with broader risk controls.

Keep maintenance instructions near the point of use, but control them through the document management system. Staff should be able to find the correct version without relying on personal notebooks or unofficial messages. When equipment is replaced or relocated, update the register, procedures, training records, risk assessment, and emergency arrangements together.

Practical priorities for implementation

A laboratory does not need sophisticated software to begin. It needs a defined scope, accurate baseline information, assigned responsibilities, and a disciplined review cycle. Start with equipment that can affect result validity or staff safety, then expand the system as experience and resources allow.

Use these priorities to establish a workable system:

Once the basic process is stable, introduce electronic reminders, barcode labels, automated temperature monitoring, or service contracts where they provide clear value. Technology should reduce missed tasks and improve evidence, not create a complicated system that staff cannot maintain.

A well-managed maintenance schedule protects testing continuity, supports laboratory safety, and gives managers credible information for budgeting and replacement decisions. Begin by inventorying the equipment this week, assigning owners, and entering the next due date for every critical item. Then review the first month of records with the quality team and use the findings to strengthen the system.