GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Establishing a Reliable TB Specimen Log in the Laboratory

A well-designed specimen log gives every tuberculosis (TB) sample a clear identity from collection to final report. It connects the request form, container, laboratory work, result, referral pathway and storage or disposal decision, creating a dependable record that staff can review without relying on memory or informal notes.

For laboratories in Australia, the log may need to support specimens arriving from metropolitan hospitals, community clinics, correctional health services, remote areas and interstate referral networks. A practical system must remain usable during a busy shift, a courier delay or a temporary information technology outage.

The aim is not to create unnecessary paperwork. The aim is to capture the minimum information needed for patient safety, traceability, quality review and timely clinical action. A clear unique identifier, standard tracking fields and defined responsibilities turn the register into an operational control rather than a passive list.

Define the Purpose And Scope

Start by describing which specimens the register covers. A TB laboratory log may include sputum, induced sputum, bronchoalveolar lavage, gastric aspirates, tissue, cerebrospinal fluid, urine and other materials submitted for microscopy, nucleic acid amplification, culture, identification or drug susceptibility testing. If some tests are performed at a referral laboratory, the local log should still record the handover.

Decide whether one record represents one patient specimen, one container or one testing episode. For most laboratories, one log entry per received specimen or container provides the strongest chain of custody. If several containers arrive under one request, link them with a shared episode or accession number while retaining a separate container suffix, such as TB-2026-00418-A and TB-2026-00418-B.

Write the purpose into the procedure: to identify specimens uniquely, locate them during testing, document their movement, support result reporting and provide evidence for incident investigation. The register should apply consistently across routine and urgent work, including specimens received after hours or transferred to another facility.

The GLI quality management framework can help laboratories connect this process with document control, equipment management, assessment, personnel responsibilities and continual improvement. The log should be part of the quality management system, not an isolated spreadsheet owned by one person.

Design A Unique Identifier

A unique identifier must be assigned once and never reused. It should be short enough to write or type accurately, but distinctive enough to prevent confusion with patient numbers, request numbers or referral laboratory accessions. A practical format might combine a laboratory code, year and sequential number: AUS-TB-26-000731.

Avoid building sensitive patient information into the identifier. Do not use a full name, date of birth, Medicare number or diagnosis as the accession code. These details increase privacy risks and make the system harder to manage when records are transferred between laboratories. The identifier should point to controlled information rather than reveal it.

If the laboratory uses an electronic laboratory information system, configure the accession number to generate automatically and prevent duplicate entries. For a paper or spreadsheet register, assign numbers from a controlled sequence and record the person who created the entry. A supervisor should reconcile gaps, duplicate numbers and cancelled records rather than allowing them to disappear.

Use the same identifier on the specimen label, request form, worksheet, culture record, extraction sheet, referral documentation and final report. Where barcode labels are available, pair barcode scanning with a readable printed code. This is particularly useful in larger services in Sydney or Melbourne, where specimens may pass through several benches and shifts before testing is complete.

Select The Essential Tracking Fields

The first group of fields should establish what arrived and when. Record the unique accession number, patient name or approved patient identifier, date of birth or another permitted demographic identifier, requesting facility, collector, specimen type, anatomical site, collection date and collection time. Use the Australian date convention consistently, such as 18/06/2026, and use a 24-hour time format to avoid ambiguity.

The second group should show the specimen’s condition and testing pathway. Include date and time received, receiving staff member, container type, volume or quantity where relevant, temperature or transport condition if required, acceptance status, rejection reason, tests requested, tests performed, and the location of the specimen. A location field might identify a biosafety cabinet queue, extraction rack, incubator, refrigerator shelf or referral dispatch batch.

The final group should document outcomes and movement. Include microscopy status, molecular test status, culture status, identification, drug susceptibility result, result authorisation date, person authorising the report, referral laboratory details, dispatch and receipt dates, storage location, disposal date and any incident or corrective action reference. Fields can remain blank while work is pending, but they should never be filled with misleading terms such as “done” or “same as above”.

Keep free-text comments limited and structured. Drop-down values such as “received intact”, “leaking”, “insufficient volume”, “unlabelled” and “wrong container” make trends easier to analyse. A short comment can add context, but it should not replace a required field or become the only record of a critical decision.

Standardise Receipt And Acceptance

The receiving procedure should begin with a two-person or barcode-based match between the container and the request information when staffing permits. Check the patient identifiers, specimen type, collection details, requested tests, container integrity and transport conditions. Record the actual arrival time rather than copying the collection time from the form.

Acceptance and rejection rules must be agreed before the log is introduced. A specimen may be unsuitable because it is unlabelled, leaking, collected in the wrong container, too old for the requested test, insufficient in volume or accompanied by incomplete information. The laboratory should distinguish between full rejection, conditional acceptance and acceptance with a documented limitation.

The guidance on specimen acceptance criteria provides a useful basis for aligning these decisions with a written standard. In practice, the person receiving the sample should record the decision, reason, notification to the requesting service and any authorised exception.

Australia’s geography makes this particularly important. A sample travelling from a regional centre to Perth, Darwin or a state reference laboratory may face long transport times, limited courier frequency or extreme temperatures. The log should capture dispatch, receipt and condition so that a delay is visible and the requesting service can be contacted promptly.

Protect The Record And Chain Of Custody

Paper registers can be appropriate for small or remote services, provided they are bound, page-numbered and stored securely. Use permanent ink, single-line corrections, initials and dates; never erase an original entry. If a page is damaged or a number is skipped, retain the page and explain the reason in a controlled note.

Electronic registers require role-based access, individual logins, automatic backups and an audit trail showing changes. Restrict patient-identifiable information to staff who need it, and avoid saving uncontrolled copies to personal desktops or portable drives. The register should be included in the laboratory’s retention schedule and privacy arrangements.

Every handover should be traceable. Record who released the specimen, who received it, the date and time, the destination and the purpose of the transfer. For an interstate referral, retain the consignment or courier reference and confirm receipt. This approach supports investigations when a culture plate, extract or referral package cannot be located.

Define how staff will manage downtime. A numbered paper form can be used during a laboratory information system outage, with later data entry performed by a nominated person and independently checked. The original paper record should be retained or scanned according to procedure, and the downtime period should be visible in the audit trail.

Monitor Completeness And Corrective Action

A register only improves quality when the laboratory reviews it. At a defined frequency, sample completed entries and check whether identifiers match across the specimen, request form, worksheets and report. Review missing collection times, unexplained delays, unrecorded referral receipts, duplicate accessions, unresolved rejection decisions and specimens with no final disposition.

Useful indicators include the proportion of entries complete at receipt, percentage of specimens labelled correctly, time from collection to receipt, time from receipt to preliminary result, number of rejected specimens and number of records amended after authorisation. Trend the data by submitting facility or specimen type, while protecting patient confidentiality.

When a problem is found, record the event and its impact rather than silently correcting the field. A recurring leak from one clinic may require transport training or a packaging change. Repeated missing request details may require a revised form or electronic order rule. The register should link the issue to an action, responsible person, due date and verification of effectiveness.

Laboratories with limited staff or funding can use corrective action priorities to focus first on risks that could misidentify a patient, delay an infectious TB result or compromise a high-value specimen. In Australia, this helps a small regional service direct attention where it has the greatest effect instead of attempting to fix every minor data variation at once.

Train Staff And Review The Workflow

Training should use real workflow examples rather than a lecture about fields. Show staff how to assign an accession number, label multiple containers, document a conditional acceptance, record a referral and correct an error. Include reception staff, couriers where relevant, specimen collectors, bench scientists, supervisors and authorised report signatories.

The procedure should state who owns each step. One person may receive and register the specimen, another may perform testing, and a supervisor may review exceptions and authorise changes. Clear ownership prevents the common situation in which everyone assumes somebody else has updated the log.

Fit the system to the local laboratory market and service model. A private pathology provider in Brisbane may use automated accessioning and barcode printers, while a small public laboratory supporting remote Queensland communities may depend on a paper backup and scheduled data entry. Both can achieve traceability if the required fields, identifier rules and review responsibilities are equivalent.

Reassess the log after changes to testing platforms, referral arrangements, forms, software or accreditation requirements. NATA assessment, internal audits and incident reviews can reveal fields that are missing or no longer useful. Remove duplication where possible, but retain every field needed to demonstrate specimen identity, movement, testing status and final disposition.

A reliable TB specimen log starts with a controlled identifier and ends with evidence that every specimen was accounted for. Establish the fields, write the receipt rules, train the people who use them and review the data at regular intervals. Use the GLI Quality Tool resources to align the register with the laboratory’s wider quality system, then pilot it on routine specimens before extending it to every testing pathway.