GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Designing a sample storage system for TB retrospective analysis

A well-designed sample storage system allows tuberculosis laboratories to answer questions that were not apparent when specimens were first collected. Archived material can support drug-resistance investigations, assay comparisons, quality reviews, outbreak studies, method verification, and evaluation of changing diagnostic policies. Its value depends on more than placing tubes in a freezer: the laboratory must preserve specimen integrity, traceability, safety, and access over time.

The design should match the laboratory’s purpose, testing methods, infrastructure, staffing, and regulatory environment. A small facility may begin with a carefully controlled refrigerator and a limited archive, while a national reference laboratory may need multiple freezers, backup power, barcode management, and formal disaster recovery. In both cases, the system should be practical enough to use consistently during routine work.

Retrospective testing also creates ethical and operational responsibilities. Specimens may contain viable Mycobacterium tuberculosis, personally identifiable information, or material collected under consent conditions that limit future use. Storage decisions therefore belong within the laboratory quality management system, with clear accountability for authorization, monitoring, access, review, and disposal.

Define the purpose and scope of the archive

Start by describing what the archive must support. The purpose may be confirmatory testing, external quality assessment, molecular epidemiology, resistance surveillance, research, or investigation of an unexpected result. Each purpose can require different specimen types, volumes, storage temperatures, retention periods, and documentation. A laboratory should avoid storing everything indefinitely simply because future value is uncertain.

Create a scope statement covering the materials that may be retained: sputum, processed sediment, culture isolates, extracted nucleic acid, dried materials, proficiency testing remnants, and associated controls. Specify whether the archive includes only patient specimens or also reference strains and quality-control materials. Define who can approve additions and who can authorize use for secondary testing.

The policy should also explain how consent, privacy, national regulations, and institutional approvals affect retrospective analysis. Where patient identifiers are necessary for clinical linkage, access should be restricted and justified. Where they are not needed, a coded or de-identified system reduces risk while preserving analytical value.

A controlled quality manual for TB laboratories can bring these decisions together with responsibilities, procedures, records, and corrective actions. The storage policy should be a controlled document, reviewed when equipment, testing methods, regulations, or program priorities change.

Map the specimen journey before selecting equipment

Storage design begins at collection and continues through accessioning, processing, freezing, retrieval, testing, refreezing, and final disposal. Map each handoff and identify where a specimen could be mislabeled, exposed to unsuitable conditions, delayed, or separated from its metadata. This process map often reveals that inventory controls and transport arrangements matter as much as freezer capacity.

At accessioning, assign a unique identifier that remains with the primary specimen and every aliquot. Labels should withstand condensation, low temperatures, disinfectants, and routine handling. A barcode system is useful, but a validated paper-based backup may be more realistic in settings with intermittent electricity, limited connectivity, or shared equipment.

Record the minimum information needed to interpret later results. Useful fields include the specimen identifier, patient or surveillance code, specimen type, collection date, receipt date, processing steps, aliquot number, storage location, test results, resistance profile where available, freeze-thaw events, and disposal date. Keep the location hierarchy precise: room, unit, freezer, rack, box, position, and tube.

Chain-of-custody records become especially important when archived material supports surveillance, legal review, research, or proficiency investigations. Every movement should show who removed the specimen, when it was removed, why it was used, and where it was returned or transferred. A retrieval log can be simple, but it must be complete, legible, and routinely checked.

Match storage conditions to specimen risk and use

There is no single ideal temperature for every TB material. The laboratory should define conditions through evidence, intended use, manufacturer instructions, biosafety requirements, and local validation. Short-term holding before processing may use a different condition from long-term storage of isolates or extracted nucleic acid. The critical point is that the chosen condition must preserve the characteristic needed for future analysis.

Material or record Design considerations Typical control measures
Primary respiratory specimen Minimize delay, leakage, contamination, and repeated warming Validated short-term holding condition, sealed secondary containment, receipt time recorded
Processed sediment or aliquot Preserve volume and analytical suitability Small working aliquots, durable labels, limited freeze-thaw cycles
Culture isolate Treat as potentially infectious and preserve the intended phenotype or genotype Authorized containment, validated storage condition, access log, backup stock
Extracted nucleic acid Protect against degradation and contamination Separate archive area, aliquoting, temperature monitoring, contamination control
Reference or quality-control material Maintain identity and performance characteristics Defined retention period, periodic verification, restricted access

Aliquoting is often central to a reliable archive. Dividing a specimen into appropriately sized portions reduces repeated thawing and allows one aliquot to be used for a single investigation. However, excessive aliquoting increases labeling, inventory, and contamination risks. The laboratory should select volumes based on expected test requirements and available collection material.

Freezers and refrigerators should be selected according to capacity, temperature range, alarm capability, service support, energy supply, and environmental conditions. A unit that cannot be repaired locally or supported with spare parts may create greater risk than a simpler model. Leave practical space for air circulation and future growth rather than filling every position at installation.

Build monitoring, backup, and biosafety into the design

Temperature monitoring must show whether storage conditions remained acceptable, not merely display the current reading. Use calibrated or verified monitoring devices, define acceptable limits, document review frequency, and establish actions for excursions. Audible alarms, remote alerts, or independent data loggers can improve detection, but staff must know who responds outside normal working hours.

Prepare a written response for power failure, equipment breakdown, alarm activation, flood, fire, specimen leakage, and loss of electronic records. The plan should identify backup units or alternate storage sites, transport containers, dry ice or other validated cooling resources, emergency contacts, and decision criteria for moving specimens. Conduct periodic drills or reviews so the response does not depend on one experienced employee.

Biosafety controls must reflect the material and the operation being performed. Opening primary containers, transferring infectious material, and handling cultures may require containment measures beyond those used for sealed, inactivated extracts. Storage areas should control access, prevent unauthorized removal, provide spill materials, and separate infectious specimens from food, medicines, and unrelated laboratory supplies.

Equipment maintenance belongs in the same system. Keep service records, preventive maintenance schedules, calibration or verification evidence, alarm tests, and repair reports. If a freezer is repeatedly unstable, the laboratory should assess whether specimens need relocation rather than accepting a pattern of undocumented excursions.

Control access, information, and retention

A sample archive is both a physical collection and an information system. Access rights should be assigned according to job role, with separate permissions for viewing records, retrieving specimens, changing inventory, approving secondary use, and deleting entries. Passwords, user accounts, paper registers, and backup files should be protected against unauthorized alteration.

The retention schedule should state how long each material is kept, what event starts the retention period, and who approves disposal. Periodic review can identify specimens with incomplete records, exhausted volume, failed quality checks, expired retention periods, or no remaining approved purpose. Disposal must be documented and performed using the laboratory’s validated biosafety and waste procedures.

Quality indicators help reveal whether the archive is functioning. Useful measures include the proportion of specimens with complete metadata, temperature excursions per storage unit, retrieval time, inventory discrepancies, mislabeled or untraceable aliquots, overdue equipment checks, and the percentage of specimens discarded according to schedule. Trends should lead to root-cause analysis and corrective action.

The broader quality management framework can help laboratories connect sample storage with document control, equipment management, personnel competency, assessment, occurrence management, and continual improvement. Storage should not operate as an isolated task assigned informally to whoever has freezer access.

Validate the system before relying on it

Before routine use, test the complete workflow with representative containers, labels, forms, software, monitoring devices, and retrieval procedures. Confirm that labels remain readable at the chosen temperature, locations can be found without ambiguity, alarms reach responsible personnel, and backup power or transfer arrangements work as intended.

A practical validation exercise can follow a specimen from receipt through aliquoting, storage, retrieval, simulated testing, return, and disposal. Record any mismatch between the written procedure and actual practice. Include staff from accessioning, testing, biosafety, information management, and quality roles because failures often occur at handoffs rather than inside the storage unit.

Competency assessment should cover labeling, inventory entry, safe handling, temperature review, excursion response, retrieval, and documentation. New staff should use supervised practice, while existing staff should be reassessed after major system changes. Training records provide evidence that the archive is operated by competent personnel.

Operational priorities for a dependable archive

A storage system becomes sustainable when it fits daily laboratory work. Forms should be concise, software should reflect the physical layout, and responsibilities should be visible on duty rosters or procedure documents. Periodic internal audits can compare the inventory with the freezer contents, verify that staff follow access rules, and confirm that corrective actions have been effective.

Use the GLI Quality Tool’s phase-specific guidance, checklists, and Quality Systems Essentials to assess the current arrangement and plan improvements at a realistic pace. Document the design, train the team, validate the workflow, and begin with the specimens most valuable for future TB analysis. A controlled, monitored, and traceable archive can turn retained material into reliable evidence for patient care and public health.