Building a reliable competency form for TB molecular testing
A tuberculosis laboratory competency assessment form should show whether a staff member can perform each stage of molecular testing safely, accurately and consistently. It is more useful than a simple attendance record because it captures observed practice, decision-making, documentation and the actions required when performance falls short.
For Australian laboratories, the form needs to work across different service models. A high-volume pathology service in Sydney or Melbourne may process specimens on several platforms each day, while a regional laboratory may handle fewer tests and refer complex work to a metropolitan centre. Staff may also rotate between microbiology, specimen reception and public health testing, so the assessment must be clear enough to support both new starters and experienced scientists returning to molecular work.
Developing a TB lab staff competency assessment form for molecular testing is therefore a quality management task, not merely a human resources exercise. It should align with the laboratory’s procedures, instrument instructions, biosafety controls, authorisation requirements and accreditation evidence. The finished record should help a supervisor answer a practical question: can this person produce and interpret a dependable result under normal working conditions?
Define the purpose and scope
Start by identifying the exact testing pathway covered by the form. A TB molecular workflow may include specimen receipt, identification, unpacking, lysis or inactivation, nucleic acid extraction, reagent preparation, amplification, result review, reporting and waste disposal. The form should state whether it applies to sputum only or also to respiratory, tissue, cerebrospinal fluid and other validated specimen types.
The scope should name the relevant assay and platform, such as an automated cartridge system or a laboratory-based nucleic acid amplification test. It should also distinguish routine testing from higher-risk activities, including troubleshooting invalid runs, handling suspected contamination, testing unusual specimens and releasing results that may indicate rifampicin or other drug resistance. A person competent on one platform should not automatically be considered competent on another.
Include fields for the staff member’s name, role, location, assessor, assessment date, procedure version and instrument identification. Recording the procedure revision matters because a result can be technically sound yet assessed against an obsolete method. In laboratories linked to a national or state referral network, the form should also identify where confirmatory testing and escalation take place.
Map the essential competencies
Divide the form into observable competency domains rather than broad statements such as “understands molecular testing”. A useful domain is specimen management, covering patient and specimen identification, acceptance criteria, leakage or rejection decisions, storage, transport conditions and traceability. In Australia, specimens may arrive by courier from remote clinics or by hospital pneumatic tube, so local transport arrangements should be reflected in the assessment.
A second domain should cover contamination control and laboratory safety. Assess whether the staff member uses the correct personal protective equipment, separates clean and amplified areas, changes gloves appropriately, decontaminates work surfaces and disposes of material under the laboratory’s biosafety procedure. The form can include an observation box for practical behaviours, rather than relying on a verbal declaration that the procedure is understood.
Technical performance should be broken into steps that an assessor can see or verify. These may include preparing the work area, checking lot numbers and expiry dates, loading samples correctly, recognising control requirements, identifying instrument alerts and documenting run information. For manual extraction or open-platform methods, add pipetting technique, calibrated equipment use and prevention of carryover contamination.
Interpretation deserves its own section. Staff should demonstrate how they review positive, negative, invalid and indeterminate results, assess internal and external controls, recognise inhibition and follow repeat-testing rules. If the assay detects genetic markers associated with drug resistance, the employee should know the limits of the result and when to arrange culture, sequencing, phenotypic testing or referral. Competency is demonstrated through a safe decision, not simply through obtaining a result.
Build an evidence-based assessment form
A strong form combines several evidence types. Direct observation is suitable for specimen handling, preparation and instrument operation. A written or electronic knowledge check can test quality control, result limitations and escalation pathways. Review of worksheets, run logs and reports shows whether the staff member documents work correctly. Where permitted by the method, a blinded sample, external quality assessment material or previously characterised material can provide evidence of analytical performance.
Use a rating system that is easy to interpret. For example, each item may be marked “competent”, “requires further practice” or “not observed”. Avoid treating “not observed” as a pass. It means the assessor still needs evidence. A separate comment field should record what was seen, what support was provided and which procedure or training resource was used.
Critical tasks should have a clear pass requirement. These might include matching the specimen to the request, using the correct assay cartridge, identifying a failed control, preventing contamination and escalating a potentially significant resistance result. A single unsafe action in one of these areas may require immediate retraining, even when the overall score appears satisfactory.
The form should also make reassessment straightforward. Include an action plan with the required training, responsible supervisor, target date and follow-up outcome. Digital forms can automatically flag overdue reviews, but a paper record can work well when it is controlled, legible and stored with the staff member’s competency file. The GLI Quality Tool provides a useful quality management framework for connecting staff competence with documentation, assessment and continual improvement.
Assess performance in realistic conditions
Assessment should occur after structured orientation and supervised practice, but before independent result release. The assessor should observe the employee using the current procedure and normal equipment wherever possible. A demonstration using an artificial exercise alone may not reveal rushed identification checks, poor bench separation or uncertainty about an instrument error.
Use scenarios that reflect the laboratory’s actual workload. One scenario might involve a correctly labelled sputum sample with a valid positive result. Another might involve an inhibited specimen, a missing control, a leaking container or a result that conflicts with clinical information. The employee should explain the next action, document it and identify who must be notified.
The assessor should evaluate communication as well as technical technique. Molecular results can affect isolation, contact tracing and treatment decisions, so staff must know how urgent or unexpected findings are communicated to clinicians and public health teams. In Australia, local arrangements may differ between state and territory services, private pathology providers and hospital laboratories; the form should name the relevant reporting pathway rather than relying on informal knowledge.
Assessment frequency should be risk based. Perform an initial assessment before authorisation, repeat it at a defined interval and reassess after a major method change, extended absence, significant error, failed quality event or transfer to another platform. A scientist who has not performed TB molecular testing for several months may need a focused return-to-practice assessment rather than a full repeat.
Connect competency with the quality system
Competency records should sit within the wider laboratory management system. Link each assessment item to a controlled procedure, work instruction, safety document or quality indicator. This creates an audit trail and helps supervisors identify whether repeated errors arise from individual performance, unclear instructions, equipment problems or workload pressures.
The form should reflect Australian compliance expectations without becoming a copy of an accreditation standard. NATA assessment against ISO 15189 commonly requires evidence that personnel are competent for assigned duties and that competence is maintained. Work health and safety obligations are managed under state and territory legislation, so the biosafety component should be reviewed against the laboratory’s jurisdiction, facility risk assessment and approved infection-control arrangements.
Local service conditions should influence review decisions. A laboratory supporting remote communities in the Northern Territory or Western Australia may need documented arrangements for transport delays, power interruptions, connectivity problems and referral testing. A large metropolitan laboratory may instead need controls for shift handovers, high throughput, agency staff and multiple instruments. The form should capture these operational risks rather than importing a generic checklist unchanged.
Review completed forms periodically for patterns. If several people struggle to interpret an invalid result, revise the training or procedure. If assessments are routinely delayed, adjust rostering or assign another qualified assessor. Continual improvement is achieved when competency evidence leads to practical changes in the workflow.
Practical controls to include
- A clear list of authorised assays, specimen types and instruments for each staff member
- Direct observation of identification, contamination prevention, run setup and result verification
- Knowledge checks covering controls, invalid results, resistance markers and escalation
- Documented retraining and reassessment actions with responsible personnel and due dates
- Periodic review of competency records alongside internal quality control, incidents and external assessment results
A well-designed competency record gives staff a fair standard, gives assessors consistent evidence and gives laboratory managers a defensible basis for authorisation. It also supports continuity when personnel move between sites, change shifts or return after an extended absence.
Adapt the form to the actual TB molecular methods in use, test it with one assessor and one staff member, then revise unclear wording before broad implementation. Store the approved version under document control and review it whenever the assay, instrument, reporting pathway or safety procedure changes. Use the completed records to strengthen training, protect patients and maintain confidence in every molecular result.