A Practical Self-Assessment Guide for TB Laboratory Teams
A laboratory self-assessment helps a tuberculosis (TB) service understand how its quality management system works in daily practice. It gives staff a structured way to compare current activities with good laboratory practice, identify risks, and agree on realistic improvements. Used well, the process is constructive rather than punitive: its purpose is to strengthen reliable testing, biosafety, reporting and patient care.
The GLI Quality Tool supports this work through a four-phase roadmap organised around twelve Quality Systems Essentials (QSEs). These cover the full laboratory system, including organisation, personnel, equipment, purchasing, process management, information management, documents and records, assessment, customer focus, facilities and safety, and continual improvement. The following approach is designed for TB laboratory staff working in Australian public, private, hospital and regional services.
Prepare the team and define the scope
Begin by appointing a small assessment group with practical knowledge of the laboratory. Include the laboratory manager or quality lead, a senior scientist, a technical officer, and, where possible, someone involved in specimen collection, infection prevention, procurement or information systems. A team-based review produces a more accurate picture than an assessment completed by one person, because different staff see different parts of the testing pathway.
Agree on the scope before opening the checklist. It may cover the entire TB service or focus on a particular area, such as smear microscopy, molecular testing, culture, identification, drug susceptibility testing, specimen reception or referral arrangements. Record which testing platforms, rooms, shifts and locations are included. A metropolitan service in Melbourne or Sydney may need to include several connected hospital laboratories, while a regional service may rely on courier transport to a central facility.
Set aside protected time and gather the evidence in advance. Useful material includes policies, standard operating procedures, staff competency records, maintenance logs, temperature charts, incident reports, internal quality control results, external quality assessment reports, stock records and recent turnaround-time data. The GLI checklists can be downloaded and used as a working document, allowing the team to mark evidence, note gaps and assign follow-up actions.
Use the checklist as an evidence review
Read each item carefully and decide what evidence would demonstrate that the requirement is being met. A policy alone is rarely sufficient. For example, a procedure for managing contaminated cultures should be supported by training records, completed incident forms, staff interviews and observations showing that the procedure is followed. The team should distinguish between “in place”, “partly in place”, “not in place” and “not applicable”, with a short explanation for every decision.
Walk through the laboratory rather than relying solely on documents. Observe specimen receipt, labelling, accessioning, storage, decontamination, testing, result verification, waste disposal and cleaning. Check whether staff can locate the current version of a procedure and explain what they would do after a spill, instrument failure, power interruption or suspected exposure. In Australia, local requirements may also reflect state or territory health department policies, hospital governance arrangements and NATA accreditation expectations.
Speak with staff in a respectful, confidential way. Ask how work is actually performed during a busy shift, at night or when an experienced colleague is absent. This can reveal workarounds that are invisible in formal records. A rural or remote laboratory may face different risks from a large Brisbane or Perth facility, such as infrequent deliveries, limited access to specialist engineers or a longer interval before replacement reagents arrive. These are system factors to document, not reasons to blame individuals.
Review the twelve quality essentials together
The QSEs are connected, so avoid treating them as isolated compartments. Personnel competence affects testing quality; equipment maintenance affects turnaround time; purchasing affects continuity of testing; document control affects every technical step. When reviewing personnel, for instance, check job descriptions, induction, supervision, competency assessment and refresher training. For equipment, review installation, validation, calibration, preventive maintenance, breakdown response and records of service.
Process management deserves close attention because it follows the specimen from collection to reporting. Examine acceptance and rejection criteria, transport conditions, biosafety precautions, internal controls, result interpretation, critical-result communication and referral testing. Staff who prepare or use solid culture media should have clear instructions and demonstrated competence; practical solid culture guidance can support training on media preparation, storage and quality checks.
Information management should include both electronic and paper systems. Confirm that patient identifiers, specimen numbers, test results, amendments and authorisation steps are traceable. Consider downtime arrangements if the laboratory information system or hospital network is unavailable. In an Australian setting, this may involve communication between a local hospital, a state reference laboratory and clinicians managing patients across different health services.
Facilities and safety should be examined in relation to the actual work being performed. Check access control, ventilation, biological safety cabinets, decontamination, emergency equipment, exposure management, personal protective equipment and waste streams. TB services should also review whether staff understand the difference between routine laboratory safety measures and controls required for work involving viable Mycobacterium tuberculosis complex organisms.
Score findings and set priorities
Once the evidence review is complete, discuss the findings as a group and look for patterns. Several small gaps may have a shared cause. Missing competency records, inconsistent procedure use and variable result authorisation may indicate weak document control or insufficient supervision rather than three unrelated problems. Record the evidence and the risk clearly so that later staff can understand why a particular action was selected.
Prioritise issues according to potential harm, likelihood, regulatory importance and effect on service continuity. A failure to maintain a biological safety cabinet, an unreliable temperature monitoring system or an inability to verify critical results should receive urgent attention. A formatting issue in a document may still need correction, but it is unlikely to outrank a biosafety or patient-identification risk. Use a simple risk rating agreed by the organisation and apply it consistently.
Consider resource constraints without lowering essential standards. Australian laboratories may purchase consumables through state-wide contracts, hospital procurement panels or specialist scientific suppliers. A remote service may need to order larger quantities because deliveries are less frequent, while a metropolitan laboratory may face different pressures from high testing volumes and multiple platforms. Where a gap cannot be closed immediately, document an interim control, the responsible person, a due date and the point at which the risk will be reviewed.
The assessment should produce a manageable improvement register, not a long list that no one can maintain. Group related actions, identify quick wins, and separate local fixes from matters requiring executive approval or reference-laboratory support. Assign one accountable owner to each action, even where several people contribute. A clear owner prevents recommendations from disappearing into general meeting minutes.
Verify improvement and maintain the cycle
After actions are completed, check whether they solved the original problem. If a new procedure was introduced, observe its use and review records after several weeks. If staff training was delivered, confirm competence through direct observation, questions, or a practical assessment. If a reagent supply problem was addressed, examine stock levels, expiry monitoring and continuity during the next delivery cycle.
Use routine indicators to monitor the effect of changes. Possible measures include specimen rejection rates, culture contamination, turnaround times, amended reports, equipment downtime, incident frequency, stock-outs, quality control failures and completion of competency assessments. Trends are more informative than a single result. A laboratory serving patients from remote Northern Territory communities, for example, may need to track courier delays separately from analytical turnaround time.
Repeat the self-assessment at an interval that matches the laboratory’s risk and change profile. An annual full review may be suitable for a mature service, with shorter checks after a major instrument installation, relocation, new test method, staffing change or significant incident. Keep previous results so the team can demonstrate progress and identify recurring weaknesses. The process should feed into management review, staff meetings, training plans and budget decisions.
Make the findings visible to the people who perform the work. Share agreed actions in plain language, explain why they matter, and acknowledge improvements. Staff are more likely to report hazards and process problems when assessments are seen as opportunities to improve the system rather than inspections designed to find fault. This culture is essential for reliable TB diagnosis and safe laboratory practice.
Use the GLI roadmap and checklists to organise the next review, then adapt the evidence requirements to your service, jurisdiction and test menu. Bring the team together, document what is really happening, act on the highest risks and revisit the results. A consistent self-assessment routine can turn quality management from a set of files into a practical part of every TB laboratory shift.