GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

A practical system for keeping TB laboratory policies current

Tuberculosis laboratories rely on policies to turn technical requirements into consistent daily practice. A policy may define how specimens are received, how instruments are maintained, how results are reported, or how staff respond to an exposure. When those instructions become outdated, quality risks can appear even in a laboratory with skilled personnel and appropriate equipment.

Creating a system for regular review and updating of TB lab policies makes document control part of routine quality management rather than an occasional accreditation exercise. The process should be predictable, evidence-based, and proportionate to the laboratory’s workload and available resources.

A useful system connects policy review with the laboratory’s quality objectives, internal assessments, staff feedback, incident reports, equipment changes, and national tuberculosis guidance. It should also create a clear record showing what changed, why it changed, who approved it, and how implementation was checked.

Start with a complete policy inventory

The first step is to identify every document that guides laboratory work. This includes policies, standard operating procedures, work instructions, forms, registers, safety plans, quality manuals, job aids, and emergency procedures. Informal instructions posted near a workbench should be included because they can influence practice just as strongly as controlled documents.

Create a master document register with a unique identifier, title, owner, version, approval date, effective date, next review date, and current location. The register should distinguish active documents from withdrawn or obsolete versions. A simple spreadsheet may be sufficient for a small facility, provided that access is controlled and updates are recorded consistently.

Group documents by process or Quality Systems Essential. For example, specimen management may include collection, transport, receipt, rejection, storage, and referral procedures. Equipment documents may cover installation, calibration, maintenance, troubleshooting, and decontamination. This mapping helps the laboratory see gaps and prevents a single high-risk process from being overlooked.

Assign ownership across the quality system

Each policy needs a named owner who understands the process and can coordinate technical review. Ownership does not mean that one person writes everything. The document owner gathers evidence, consults the relevant staff, checks applicable requirements, and submits the revision for approval.

The quality manager or quality focal person should maintain the review calendar and verify that document control rules are followed. Technical supervisors, biosafety personnel, clinicians, procurement staff, and information technology colleagues may need to participate when a policy affects their work. Senior leadership remains responsible for approving documents that commit resources or change laboratory responsibilities.

The GLI Quality Tool organizes improvement around twelve Quality Systems Essentials, including personnel, equipment, documents and records, assessment, process management, and continual improvement. Using the Quality Systems Essentials as a framework can help laboratories assign policy ownership without treating document review as an isolated administrative task.

Define routine reviews and change triggers

A fixed review interval provides a dependable baseline. Many laboratories choose an annual review for high-risk procedures and a review every two years for lower-risk administrative documents. The interval should reflect the consequences of error, the frequency of change, and the laboratory’s capacity to evaluate documents properly.

A scheduled review does not mean that every document must be rewritten. The owner may confirm that the policy remains suitable, record the review decision, and retain the existing version. If changes are needed, the revision should proceed through the same authorization and communication steps as a new document.

Unscheduled review should occur when an event could affect policy accuracy or safety. Triggers include a new test method, instrument replacement, revised national guidance, an external assessment finding, a staff competency concern, a biosafety incident, a specimen error, a supplier change, or a change in referral arrangements. A short trigger log can help supervisors capture these events before they are forgotten.

Control revisions with evidence and traceability

Policy updates should begin with evidence rather than assumptions. Reviewers can examine nonconformities, corrective action records, quality indicators, internal audit findings, proficiency testing outcomes, incident reports, user complaints, staff suggestions, and changes in workload. The evidence should show whether the current instruction is unclear, impractical, incomplete, or technically outdated.

When revising a document, preserve version history and describe the reason for each substantive change. A revision summary might state that specimen rejection criteria were clarified after repeated labeling errors, or that an equipment maintenance frequency changed following manufacturer guidance. This information supports accountability and makes future reviews faster.

Before approval, the draft should receive technical, quality, and safety checks appropriate to its content. The approver should confirm that the procedure is feasible with available staff, supplies, infrastructure, and instruments. Policies copied from another laboratory may contain assumptions that do not fit local conditions, so local verification is essential.

Policy area Routine review focus Examples of change triggers Evidence to retain
Specimen management Collection, labeling, transport, rejection, storage New referral site or recurring labeling errors Rejection log, audit findings, revised forms
Testing procedures Method steps, controls, interpretation, reporting New assay, instrument change, updated guidance Validation records, manufacturer instructions
Biosafety Risk controls, waste handling, exposure response Incident, facility modification, new hazard Incident review, risk assessment
Personnel and competency Roles, training, authorization, supervision Staff turnover or performance concern Training records, competency assessment
Equipment Operation, maintenance, calibration, downtime response Replacement, service change, repeated failures Service reports, maintenance logs
Records and information Data entry, result release, confidentiality, retention Software change or reporting requirement Error log, system validation, user feedback

Controlled copies should be easy to identify. Each active document should display its title, identification code, version, approval status, effective date, and page numbering. Electronic copies need access permissions and a method for preventing staff from using downloaded or locally saved obsolete versions. Printed copies should be placed only at approved locations and checked during document distribution.

Make implementation part of the review

A revised policy is not effective simply because it has been signed. Staff need to know what changed, when the change takes effect, and how the new instruction affects their work. Communication may involve a team briefing, focused training, a demonstration, a competency assessment, or supervised practice at the bench.

Training should be matched to the risk and complexity of the change. For example, a minor wording correction may require notification, while a revised staining method or microscope procedure may require observation and documented competency. Practical resources on fluorescent microscopy training can support targeted instruction when policy updates affect TB microscopy activities.

Supervisors should check implementation after a defined period, such as two to eight weeks after the effective date. Observation, record review, interviews, and quality indicators can show whether staff are following the revised procedure. If the new policy is repeatedly bypassed, the laboratory should investigate whether the instruction is unclear, unrealistic, insufficiently communicated, or unsupported by supplies and equipment.

Build a review calendar that people can use

The review calendar should be visible to those responsible for document control and simple enough to maintain. A monthly quality meeting can include a short review of documents due within the next quarter, open revision actions, overdue approvals, and implementation checks. Escalation rules are useful when an owner cannot complete a high-priority review on time.

A risk-based priority system helps laboratories use limited time wisely. Policies linked to patient results, biosafety, specimen integrity, or critical equipment should receive closer monitoring than documents with limited operational impact. However, low-risk documents should still be tracked so that they do not disappear from the quality system.

Useful recommendations include:

A strong review system should produce simple evidence: a current document register, signed approvals, revision histories, training records, and verification that the revised process is being followed. These records demonstrate control without creating unnecessary paperwork.

When a laboratory treats policies as working tools, regular review becomes part of dependable TB testing. Begin by inventorying current documents, identify the highest-risk gaps, and place the first review dates on a shared calendar. Then use findings from routine work to refine the system so every policy remains accurate, usable, and aligned with the laboratory’s quality objectives.