GLI GLI Quality Tool
GLI Quality Tool — Version 2.0

Building A Practical TB Laboratory Biological Hazard Assessment

A risk assessment template for TB lab biological hazards gives staff a consistent way to identify exposure pathways, rate risk, and document controls. It should support daily work rather than become a form completed once and filed away. For laboratories handling sputum, cultures, molecular specimens, or drug-susceptibility testing, the assessment must reflect each procedure and the equipment actually available.

Tuberculosis work can generate infectious aerosols during specimen opening, vortexing, centrifugation, aliquoting, and culture manipulation. A useful template therefore connects hazards with specific tasks, people at risk, existing safeguards, and actions still required. It should also make clear who approves the assessment and when it must be reviewed.

Australian laboratories operate under different state and territory work health and safety arrangements. A facility in Sydney or Melbourne may have dedicated biosafety staff and continuous engineering support, while a regional service in the Northern Territory or Western Australia may manage long supply chains, limited maintenance access, and staff rotation. The template must be practical in both settings.

The document should align with the laboratory’s quality management system, including document control, competency records, incident reporting, equipment maintenance, and internal assessment. It can be used alongside the GLI Quality Tool’s phased approach, helping a TB service turn general quality principles into task-level biological risk controls.

Define The Scope And Assessment Team

Begin by stating what the assessment covers. It may include the receipt of clinical specimens, accessioning, smear preparation, nucleic acid extraction, culture, storage, waste treatment, transport, and decontamination. If the laboratory performs only molecular testing, exclude culture activities but still assess specimen opening and steps that could release aerosols.

The assessment team should include the laboratory manager, a technical representative, a biosafety or infection prevention adviser, and workers who perform the procedures. Include facilities, cleaning, and waste personnel when their work brings them into contact with contaminated materials. In a small regional laboratory, one person may hold several roles, but the different perspectives should still be recorded.

Add fields for site, department, procedure, assessor names, date, version, and approval. Record whether the assessment applies to routine work, maintenance, spill response, after-hours operation, or unusual workloads. During a respiratory disease surge, staff may process more samples, work longer shifts, or use temporary work areas, so the scope should allow reassessment under changed conditions.

Describe Hazards And Exposure Routes

A strong biological hazard assessment names the hazard precisely. For TB work, this may be viable Mycobacterium tuberculosis complex in sputum, culture, or contaminated equipment. It should distinguish known or suspected infectious material from specimens awaiting results, because uncertainty is itself a reason to apply conservative controls.

Describe how exposure could occur. Aerosol inhalation is usually the central concern, but splashes to the eyes, contamination of hands or surfaces, sharps injuries, and accidental ingestion from poor hand hygiene also deserve attention. Identify activities that create aerosols, such as vigorous mixing, opening pressurised containers, centrifuge failure, and cleaning a spill outside a biological safety cabinet.

The template should prompt assessors to consider people who may not be visible in the testing workflow. This includes specimen reception staff, cleaners, couriers, maintenance contractors, students, visitors, and waste handlers. In Australia, specimens can travel considerable distances from remote communities to metropolitan referral laboratories; packaging failures or delays during hot weather may create additional handling and leakage risks.

Rate Risk Before And After Controls

Use a transparent scoring method that separates likelihood from consequence. A five-point scale is usually detailed enough for routine laboratory use: likelihood can range from rare to almost certain, while consequence can range from minor illness or limited contamination to severe disease, multiple exposures, or a major operational interruption.

The initial rating should describe the inherent risk before safeguards are considered. The residual rating should reflect controls that are verified and available during the assessed task, not controls that are merely planned. A risk matrix is helpful, but the score should never replace professional judgement. A low-frequency event may still require urgent action if the possible outcome is serious.

Likelihood Consequence Example For TB Work Suggested Response
Rare Moderate Small sealed spill during routine handling Maintain controls and monitor
Unlikely Major Container leak during receipt Improve packaging and response readiness
Possible Major Aerosol release during specimen processing Review engineering and procedural controls promptly
Likely Severe Repeated open-bench manipulation of infectious material Stop or redesign the task
Almost certain Severe Known faulty cabinet used for aerosol-generating work Suspend activity until corrected

Write a short justification beside every rating. “Possible because the lid is manually opened after vortexing” is more useful than a score alone. Where the laboratory uses a different matrix, define its terms in the template so that assessors in Brisbane, Adelaide, or a remote site interpret the categories consistently.

Select Controls Using The Hierarchy

Start with elimination or substitution where feasible. For example, a validated closed molecular platform may reduce open handling compared with a manual process, although it does not remove the need to assess specimen receipt and instrument loading. Administrative controls include restricted access, written procedures, competency assessment, scheduling, supervision, and clear rules for transporting infectious material within the facility.

Engineering controls are particularly important for TB laboratories. A certified Class II biological safety cabinet, suitable room airflow, sealed centrifuge cups or rotors, and effective decontamination equipment can reduce aerosol exposure. The template should record the control’s location, commissioning or certification date, responsible owner, and any conditions that limit its use. Australian laboratories commonly rely on AS/NZS 2243.3 guidance for safety in microbiological laboratories, while accreditation expectations may also involve NATA and ISO 15189 requirements.

Personal protective equipment should be the final layer rather than the main solution. Depending on the task and local assessment, this may include a fit-tested respirator, protective gown, gloves, and eye or face protection. Australian facilities may use P2 respirators, but selection, fit testing, storage, facial hair considerations, and training must be documented. The template should identify what happens if the correct PPE is unavailable, rather than assuming staff will improvise.

Add Actions, Owners, And Verification

Each control gap needs an action with an owner and due date. “Improve ventilation” is too vague; “Facilities manager to arrange airflow verification for room B by 30 September” can be tracked. Record the priority, required resources, interim control, completion evidence, and person responsible for checking effectiveness.

Verification may include biological safety cabinet certification, observation of a specimen-processing procedure, review of respirator fit-test records, surface decontamination checks, or a drill for a leaking sample. If a laboratory buys PPE through the Australian market, note supplier, product specification, stock level, and expected replenishment time. This matters when freight to regional Queensland or Western Australia is delayed and a nominal control may not be available in practice.

Link the assessment to incident, near-miss, exposure, and corrective-action systems. A spill, failed cabinet alarm, broken specimen tube, or staff report of unsafe practice should trigger review of the relevant section. Routine review should also occur after a new instrument, altered room layout, staffing change, procedure change, or significant increase in testing volume.

Make The Template Usable And Reviewable

A practical template can use one row for each task or hazard, with fields for hazard, exposure route, affected people, existing controls, likelihood, consequence, risk level, additional action, owner, due date, and verification. Add a separate approval block and a revision history. Keep detailed procedural instructions in controlled standard operating procedures rather than overcrowding the assessment form.

Use plain language and make the form accessible at the point of work. A digital version may support automatic scoring and overdue-action alerts, while a controlled paper copy can be more dependable during power, network, or system outages. Staff should know where the current version is stored and how to report a change that requires immediate review.

The assessment should be included in induction, refresher training, and competency checks. Supervisors can ask workers to explain why a biological safety cabinet is required, what to do after a spill, and how to manage a specimen when the cabinet is unavailable. These everyday checks are especially valuable where staff rotate between laboratories or where a single service supports widely separated communities.

Use the phase 4 improvement guidance to connect completed risk assessments with measurement, corrective action, and continual improvement. Feedback from workers is equally important because the person performing the task often sees practical problems first; the GLI Quality Tool provides a way to share feedback about how the resource works in practice.

A completed assessment should demonstrate that the laboratory understands its hazards, has selected controls proportionate to risk, and can prove those controls remain effective. It should be reviewed at planned intervals and whenever facts change. In Australian settings, cross-check the final document against applicable state or territory WHS legislation, local public health requirements, transport rules, and the facility’s accreditation obligations.

Build the template into the laboratory’s controlled document system, test it with staff during a real workflow, and revise it after the first drill or incident review. A clear, evidence-based assessment can protect workers, patients, couriers, cleaners, and the wider community while giving the laboratory a reliable foundation for safer TB testing.